Mail Settings - Hitachi CP-X3014WN User Manual

3. Web Control
3.1 Projector Web Control (continued)

3.1.5 Mail Settings

Item
Send Mail
SMTP Server Address
Sender E-mail address
Recipient E-mail address
Click the [Apply] button to save the settings.
NOTE
• You can confirm whether the mail settings work correctly using the
[Send Test Mail] button. Please enable Send mail setting before clicking the
[Send Test Mail].
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
24
Displays and configures e-mail addressing
settings.
Click the [Enable] check box to use the e-mail function.
Configure the conditions for sending e-mail under the Alert
Settings.
Configures the address of the mail server in IP format.
• The address allows not only IP address but also domain
name if the valid DNS server is setup in the Network
Settings. The maximum length of host or domain name is up
to 255 characters.
Configures the sender e-mail address.
The length of the sender e-mail address can be up to 255
alphanumeric characters.
Configures the e-mail address of up to five recipients. You
can also specify the [TO] or [CC] for each address. The
length of the recipient e-mail address can be up to 255
alphanumeric characters.
Description