Hitachi CP-X3014WN User Manual page 28

3. Web Control
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item
Schedule
Date (Month/Day)
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item
Time
Command
[Parameter]
Power
Input Source
My Image
Messenger
Slideshow
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
28
Click the [Enable] check box to enable the schedule.
Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Configures the time to execute commands.
Configures the commands to be executed.
Configures the parameters for power control.
Configures the parameters for input switching.
Configures the parameters for My Image data display. (&50)
Configures the parameters for Messenger data display. (&51)
Configures the Start/Stop parameters for the Slideshow.
Description
Description