Crestron E-Control - Hitachi CP-X3014WN User Manual

3. Web Control

3.2 Crestron e-Control

The Main window as shown above is displayed
at first. However, if you have enabled User
Password on the Tools window (&46), a
dialog prompting you to enter the password
as shown on the right will be displayed, and
no operation is enabled until you have entered
the password. After entering the preset
password, the dialog disappears and the Main
window will be displayed.
As shown below, you can open a window by
clicking the corresponding tab at the top right
of the window.
Tab
Log Out
Tools
Info
Contact IT Help
NOTE
• If Crestron e-Control in the Network Settings (&21) is set to
Disable, Crestron e-Control
Crestron e-Control and close the web browser. Next, restart the web browser,
followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
42
®
Logs out from e-Control
This tab appears only when User Password of the Tools window is
enabled.
Opens Tools window (&45).
Opens Info window (&47).
Opens Help Desk window (&48).
cannot be used to operate the projector. Enable
®
User Password dialog
Description
®
.
.
®
Tab