Mail Settings - Hitachi CP-WU8700 User Manual

3. Web Control
3.1 Projector Web Control (continued)

3.1.5 Mail Settings

Item
Send Mail
Authentication
SMTP Server
Server
address
Port
number
POP Server
Server
address
Port
number
(continued on next page)
48
Click the [Enable] check box to use the e-mail function. Configure the
conditions for sending e-mail under the Alert Settings.
Selects the authenticaton method.
Enter the user name of the SMTP server or POP server as the user
name.
Enter the password of the SMTP server or POP server as the
password.
The maximum number of input characters is 63.
Only alphabets, numbers and the following symbols can be used.
!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Configures the SMTP server.
Configures the SMTP server address.
• The address allows not only IP address but also domain name if the
valid DNS server is setup in the Network Settings. The maximum
length of host or domain name is up to 255 characters.
Alphanumeric characters, "-", or "." can be used.
Configures the port number of the SMTP server.
It is set to 25 as the default setting.
Configures the POP server.
Configures the POP server address.
• The address allows not only IP address but also domain name if the
valid DNS server is setup in the Network Settings. The maximum
length of host or domain name is up to 255 characters.
Alphanumeric characters, "-", or "." can be used.
Configures the port number of the POP server.
It is set to 110 as the default setting.
Displays and configures e-mail addressing
settings.
Description