Table of Contents
Advertisement
OPERATIONS
Start recording on the VIDEO 1.
3
※ If you select AUX for hearing and VIDEO 1 for seeing, whenever you select AUX, the VIDEO 1 is selected
automatically as video input source. So you are sure to be observe the order and doing of the above steps 1
and 2.
DIGITAL AUDIO RECORDING WITH MD RECORDER
• Only when the OPTICAL DIGITAL OUT of this receiver is connected to the OPTICAL DIGITAL IN of the MD recorder or CD
recorder, you can enjoy high-quality sound of digital recording without converting the original signals. Refer to "CONNECTING
AUDIO COMPONENTS"/ " CONNECTING VEDIO COMPONENTS"/"CONNECTING DIGITAL INs and OUT" on page 5~6 and
the operating instructions of the MD recorder or CD recorder.
Notes:
• Digital recording is available for the digital audio program sources such as CDs, MDs, some DVDs, etc.
• In most DVDs as well as some CDs, etc., digital recording may not be available depending on the signal format.
• There are some restrictions on recording digital signals. When making digital recordings, refer to the operating instructions of
your digital recording equipment to know what restrictions are imposed.
Select a desired input of AUX, VIDEO
1
1~3 as a recording source.
INPUT SELECTOR
or
Start recording on the component
3
connected to OPTICAL DIGITAL OUT.
33
4
• The audio signal from the AUX and the video signal
from the VIDEO 2 will be dubbed and you can
enjoy them on the TV set and from the speakers.
2
AUX
• Each time this button is pressed, the corresponding
VIDEO1
input is selected as follows:
VIDEO2
VIDEO3
A(nalog)
Note : When the selected digital input is not
4
www.gateway.com
Start play on the AUX and the VIDEO 2
respectively.
For digital recording, select the desired
digital input as recording signal input.
DIGITAL INPUT
AM/FM MODE
o(ptical) 1
o(ptical) 2
connected, "DIGITAL" indicator flickers.
There will be no recording as well as no sound.
Start play on the desired input.
c(oaxial) 1
Advertisement
Table of Contents
