Table of Contents
Advertisement
OPERATIONS
LISTENING TO RADIO BROADCASTS
To select the tuner,
To select the desired band
DIGITAL INPUT
AM/FM MODE
BAND
Manual tuning
※ ※ Manual tuning is useful when you already know the
frequency of the desired station.
Select the tuning mode.
1
DECODING
TUNE MODE
• Each time this button is pressed, the mode changes
as follows;
Tuning mode : "PRESET" goes off.
Preset mode : "PRESET" lights up.
Press the below button repeatedly until the
2
right frequency has been reached.
ADJUST
TUNING/PRESET
or
INPUT SELECTOR
or
FREQUENCY
TUNE
-, +
www.gateway.com
TUNER
• Each time this button is pressed, the band is changed
as follows:
FM STEREO
FM MONO
• When FM stereo broadcasts are poor because of weak
broadcast signals, select the FM mono mode to reduce
the noise, the FM broadcasts are reduced in monaural
sound.
Auto tuning
Select the tuning mode.
1
DECODING
TUNE MODE
Press the below button for more than 0.5
2
second.
ADJUST
TUNING/PRESET
or
• The tuner will now search until a station of sufficient
strength has been found. The display shows the tuned
frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When pressing the TUNE +/- buttons on the remote
control, you need not select the tuning mode on step 1.
AM
TUNE
-, +
30
Advertisement
Table of Contents
