Fein ASW10-6-2ST Manual page 12

OBJ_BUCH-0000000059-001.book Page 12 Monday, January 16, 2012 3:14 PM
en
12
en Original Instructions for Cordless Screwdriver.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Observe the instructions in the text or graphic opposite!
Do not touch the rotating parts of the power tool.
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, remove the battery from the power tool. Other-
wise there may be danger of injury caused by unintentional starting of the power tool.
Use eye protection during operation.
Gripping surface
Do not charge damaged batteries.
Keep the battery away from fire. Protect the battery against heat, e. g. against continuous
intense sunlight.
Confirms the conformity of the power tool with the directives of the European Commu-
nity.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Recycling symbol: designates recyclable materials
Worn out power tools and other electrotechnical and electrical products should be
sorted separately for environmental-friendly recycling.
Battery type
Reduce torque
Increase torque
Character Unit of measurement,
international
U
V
n /min
0
M... Nm
Ø mm
kg
L dB
pA
L dB
wA
L dB
pCpeak
K...
2
m/s
2
m/s
h
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Unit of measurement, Explanation
national
V DC voltage
rpm No-load speed
Nm Torque
mm Diameter of a round part
kg Weight according to EPTA-Procedure 01/2003
dB Sound pressure level
dB Sound power level
dB Peak sound pressure level
Uncertainty
2
m/s Vibrational emission value according to EN 60745
(vector sum of three directions)
2
m/s Vibrational emission value (screwdriving)
m, s, kg, A, mm, V, Basic and derived units of measurement from the
W, Hz, N, °C, dB, international system of units SI.
2
min, m/s