Water entering a power Only carry out such operations with this tool will increase the risk of electric power tool as intended for by FEIN. Only use shock. application tools and accessories that have d) Do not abuse the cord. Never use the been released by FEIN.
Page 4
OBJ_BUCH-0000000371-001.book Page 4 Wednesday, February 20, 2019 9:29 AM c) Prevent unintentional starting. Ensure c) Disconnect the plug from the power the switch is in the off-position before source and/or remove the battery pack, connecting to power source and/or bat- if detachable, from the power tool tery pack, picking up or carrying the before making any adjustments, chang-...
Page 5
OBJ_BUCH-0000000371-001.book Page 5 Wednesday, February 20, 2019 9:29 AM c) When battery pack is not in use, keep it f) Do not expose a battery pack or tool to away from other metal objects, like fire or excessive temperature. Exposure paper clips, coins, keys, nails, screws or to fire or temperature above 130 °C other small metal objects, that can...
OBJ_BUCH-0000000371-001.book Page 6 Wednesday, February 20, 2019 9:29 AM Safety warnings for drills. Safety instructions for all operations. small abrasive or workpiece fragments. The safety glasses must be capable of protecting Use auxiliary handle(s). Loss of control can against flying particles generated by the vari- cause personal injury.
OBJ_BUCH-0000000371-001.book Page 7 Wednesday, February 20, 2019 9:29 AM Handling hazardous dusts. When working with power To minimize the unwanted intake of these WARNING tools, such as when grinding, materials: sanding, polishing, sawing or for other work – Use dust extraction matched appropriately procedures where material is removed, dusts for the developing dust.
Page 8
Intended use of the power tool: Hand-held cordless drill/driver for screwing in and unscrewing screws and nuts, and for drilling and screwdriving in metal, wood, plas- tic, ceramics, in weather-protected environ- ments without water supply using the application tools and accessories recom- mended by FEIN.
Page 9
OBJ_BUCH-0000000371-001.book Page 9 Wednesday, February 20, 2019 9:29 AM Symbols. Symbol, character Explanation Do not touch the rotating parts of the power tool. Make sure to read the enclosed documents such as the Instruction Man- ual and the General Safety Instructions. Observe the instructions in the text or graphic opposite! Before commencing this working step, remove the battery from the power tool.
Page 10
OBJ_BUCH-0000000371-001.book Page 10 Wednesday, February 20, 2019 9:29 AM Symbol, character Explanation High speed Reduce torque Increase torque (**) may contain numbers and letters Partially in delivery scope Character Unit of measurement, Explanation national rpm; /min; min ; r/min No-load speed (with fully charged battery) Electrical power °...
Page 11
OBJ_BUCH-0000000371-001.book Page 11 Wednesday, February 20, 2019 9:29 AM Technical description and specifications. Before mounting or replacing application tools or accessories, remove the bat- WARNING tery. This preventive safety measure rules out the danger of injuries through accidental starting of the power tool. Not all accessories described or shown in this instruction manual will be included with your- power tool.
Page 12
OBJ_BUCH-0000000371-001.book Page 12 Wednesday, February 20, 2019 9:29 AM Type ASCM18QM (**) Order number 7 116 ... Rated voltage 18 V No-load speed 1. Gear 0–400 /min 2. Gear 0–800 /min 3. Gear 0–1950 /min 4. Gear 0–3850 /min Torque 407/797 in-lbs/ (soft/hard screwdriving application) 46/90 Nm...
Page 13
OBJ_BUCH-0000000371-001.book Page 13 Wednesday, February 20, 2019 9:29 AM Assembly instructions. Before mounting or replacing application tools or accessories, remove the bat- WARNING tery. This preventive safety measure rules out the danger of injuries through accidental starting of the power tool. Mounting the auxiliary handle (figure 2).
Page 14
OBJ_BUCH-0000000371-001.book Page 14 Wednesday, February 20, 2019 9:29 AM Removing and charging the battery Fig. 3 (figure 3). Prior to the first charging procedure, read the operating instructions of the battery charger. Charge the battery completely before putting into operation for the first time. Battery-Unlocking button Release the battery by pressing the battery- unlocking button and pull the battery out of...
Page 15
OBJ_BUCH-0000000371-001.book Page 15 Wednesday, February 20, 2019 9:29 AM Mounting the belt hook and the bit Fig. 4 Spacer garage (figure 4). To mount the belt hook, fit the spacer as well Belt hook as the belt hook to the tool and fasten both with the screw.
Page 16
OBJ_BUCH-0000000371-001.book Page 16 Wednesday, February 20, 2019 9:29 AM Mounting the drill chuck (figure 5). Fig. 5 When changing the drill chuck, avoid debris from entering the drill chuck and the spindle! Slide the ring toward the front. Place the drill chuck onto the spindle. Release the ring.
OBJ_BUCH-0000000371-001.book Page 17 Wednesday, February 20, 2019 9:29 AM Changing the tool Before mounting or replacing application tools or accessories, remove the bat- WARNING tery. This preventive safety measure rules out the danger of injuries through accidental starting of the power tool. Mounting application tools (figure 7).
Do not use accessories not specifically intended and recommended for this power tool by FEIN. The use of non-original FEIN accessories can lead to overheating of the power tool and destroy For each job, use only the FEIN application tool released and intended for the CAUTION respective application.
Page 19
OBJ_BUCH-0000000371-001.book Page 19 Wednesday, February 20, 2019 9:29 AM Electronic torque shut-off (figure 11). Fig. 11 Adjust the torque only when the machine is at a complete stop. On/Off switch The motor switches off when reaching the set torque and an audio signal sounds. After the shut-off has taken place, release the on/off switch and press it again for the next screw- driving operation.
Page 20
OBJ_BUCH-0000000371-001.book Page 20 Wednesday, February 20, 2019 9:29 AM Selecting the rotation direction Fig. 12 (figure 12). To avoid accidental starting, e. g., during transport, set the rotation selector switch to the centre position. Set the rotation selector switch to right or left rotation as required.
Need help?
Do you have a question about the ASCM18QM Series and is the answer not in the manual?
Questions and answers