Lexicon M300L Owner's Manual page 71

300L Owner's Manual
Lexicon
RLVL (Reverb Level)
RLVL sets the amount of reverberation in the processed signal. It is normally
FULL, but may be reduced for effects where the pre-echoes should dominate.
Random Hall Page Five
DL3*, LV3, FB3
Pre-Echo 3, 2.8 seconds maximum to left channel, with feedback.
DL4*, LV4, FB4 Pre-Echo 4, 2.8 seconds maximum to right channel, with feedback.
* A quick "double-click" on the DL3 or DL4 slider button will allow you to control
the delay with more resolution. To exit this fine control mode, double-click on the
button again.
4-8