Troubleshooting - Panasonic PT-CW330EA Operating Instructions Manual

Hide thumbs Also See for PT-CW330EA:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting
Please check following points. For details, see the corresponding pages.
Problem
Power does not turn
on.
No picture appears.
The picture is fuzzy.
The color is pale or
grayish.
No sound from the
internal speaker
The remote control
does not operate.
The color of the
image is strange.
[Picture] menu can
not be adjusted.
62
- ENGLISH
The power cord may not be connected.
z
No electric supply is at the wall outlet.
z
The circuit breakers have tripped.
z
Is the <LAMP> indicator, <ON(G)/STANDBY(R)> indicator, or <TEMP >
z
indicator lit or blinking?
The lamp cover has not been securely installed.
z
The video signal input source may not be connected to a terminal
z
properly.
The input selection setting may not be correct.
z
The [Brightness] adjustment setting may be at the minimum setting.
z
The input source which is connected to the projector may have a
z
problem.
The [AV mute] function may be in use.
z
The lens focus may not have been set correctly.
z
The projector may not be at the correct distance from the screen.
z
The lens may be dirty.
z
The projector may be tilted too much.
z
[Color] or [Hue] adjustment may be incorrect.
z
The input source which is connected to the projector may not be
z
adjusted correctly.
RGB cable is damaged.
z
The input terminals may not have been correctly connected.
z
The volume may have been set to the minimum level.
z
The [AV mute] function may have been turned on.
z
When the VARIABLE AUDIO OUT is plugged-in, the projector's built-in
z
speaker is not available.
The Mute function may have been turned on.
z
The battery may be weak.
z
The battery may not have been inserted correctly.
z
The remote control signal receptor on the projector may be obstructed.
z
The remote control unit may be out of the operation range.
z
Strong light such as fluorescent shine onto the signal receptor.
z
When different remote IDs are set on the projector and on the remote
z
contro
.
l
The setting of [3D] may not be switch to [On].
z
The setting of [3D] may not be switch to [On].
z
Cause
Reference
page
31, 54
59
27~29
34
38
17
26
23~25
55
38~39
27~29
44
17
20
44
21
17
17
17
21, 43
47
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-cw240Pt-cw330uPt-cw330Pt-cw240eaPt-cx300ea

Table of Contents