Table of Contents
Advertisement
Troubleshooting
Problem
Messages displays
Attention
Please contact your dealer if the projector still can not be operated normally after following the instructions above.
z
Note
The <AUTO ADJ.> operation may not optimize the image position or the resolution, depending on the input signal format or
z
the image contents. In this case, switch to a different image and execute <AUTO ADJ.> again.
64
- ENGLISH
Dust Filter Reminder Message:
z
This message displays when the projector reached the timer set in
the [Filter Reminder (Hour)]. In this case, please clean the air filters or
replace them.
Lamp Warning Message:
z
The lamp has reached its end of life, please replace it as soon as
possible.
Fan Locked Warning Message:
z
This shows the fan has stopped during projection and the power will be
shut off soon. Unplug the power cord from the outlet and contact your
dealer for details.
Temperature Fail Message :
z
The internal temperature is too high and the power will be shut off soon,
please confirm the display items.
Cause
Reference
page
57
60
56
Advertisement
Table of Contents
