Table of Contents
Advertisement
Maintenance/replacement
4 )
Clean the air filters.
Vacuum dirt and dust from the air filters.
z
5 )
Install the air filters.
To install the air filters, reverse the previous steps until you hear a "click" sound.
z
6 )
Reset the [Filter Reminder].
Turn on the power and perform [Cleaning up Reminder] in the [Options] menu.
z
Attention
Turn off the power before you clean the air filters.
z
Be sure to attach the air filters properly. If you use the projector without attaching the air filters, the projector may be
z
damaged due to the dirt or dust.
Note
If the air filter has been damaged or dust / dirt can not be removed, please replace it with a new filter.
z
The <TEMP> indicator lights up and the warning temperature message displays because of clogging within 500 hours,
z
depending on the using environment. In that case, clean the air filter at short intervals.
58
- ENGLISH
Æ
(
page 46)
Advertisement
Table of Contents
