Troubleshooting - Panasonic PT-LC75U Service Manual

7.10.3. Equipment to be used
PC, Software for Adjustment, Signal Generator
7.10.4. Adjustment Procedure
1. Display the ghost adjustment menu.
2. Input a checker pattern signal.
3. Minimize the ghost while observing the projected pattern.
4. Set the value to the point being its optimum value minus 1.
7.11. Angle Reset
7.11.1. Adjustment Menu
7.11.2. Explanation of Buttons
OK:
Executes angle reset, then closes this dialog.
Cancel:
Cancels this menu.
7.11.3. Equipment to be used
PC, Software for Adjustment
7.11.4. Adjustment Procedure
1. Display the angle reset menu.
2. Set the projector on a horizontal place.
Note:
This is used for the reference level of the angle sensor.
3. Click the OK button.

8. Troubleshooting

42