Using The Status Indicators - Gateway SJM40 Reference Manual

CHAPTER 3: Setting Up and Getting Started
To close unresponsive programs on your notebook:
1
2
3
4
5
To restart your notebook:
•

Using the status indicators

to toggle the status indicators on.
Status indicators inform you when a drive is being used
or when a button has been pressed that affects how
the keyboard is used. The status indicators are located
below the touchpad.
26
Press C +A +D
TRL LT
Click Start Task Manager. The
Manager
dialog box opens.
Click the program that is not responding.
Click End Task.
Click X in the top-right corner of the
Task Manager
dialog box.
Click (Start), click the arrow next to the lock
icon, then click Restart. The notebook turns off,
then turns on again.
Important
If your notebook does not turn off immediately,
complete the following steps until the notebook turns off:
1. Press and hold the power button for about five seconds,
then release it.
2. Unplug the power cord and remove the battery for more
than 10 seconds.
Important
If none of the indicators are on, you may need to press F
Drive
Wireless network
.
EL
Windows Task
Bluetooth
Caps lock
Windows
+F1
N