CHAPTER1 About This Reference • About this guide • Accessing your online User Guide • Gateway contact information • Microsoft Certificate of Authenticity • For more information...
CHAPTER 1: About This Reference About this guide This guide includes information and maintenance instructions that are specific to your model of Gateway notebook. For all other notebook information, see User Guide your online Accessing your online User Guide User Guide...
Gateway model and serial number A label on the bottom of your notebook contains information that identifies your notebook model and its features. Gateway Customer Care will need this information if you call for assistance. Microsoft Certificate of Authenticity...
CHAPTER 2: Checking Out Your Notebook Front Memory card Power Battery charge indicator reader indicator Component Icon Description Power indicator LED on - Notebook is on. ■ LED blinking - Notebook is in Sleep or ■ Hybrid Sleep mode. LED off - Notebook is off. ■...
Left Express Card Power slot connector Ethernet HDMI out Monitor eSATA jack Microphone jack jack port port (optional) jack (optional) Headphone jack Component Icon Description Power Plug the AC adapter cable into this connector connector. Ethernet jack Plug an Ethernet network cable into this jack.
CHAPTER 2: Checking Out Your Notebook Component Icon Description Microphone Plug a microphone into this jack. jack Express Card Insert one Type 54 Express Card into this slot slot. For more information, see “Adding and removing an Express Card” on page Right Modem...
Back Ventilation fan Component Description Ventilation fan Helps cool internal components. Warning: Do not work with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution: Do not block or insert objects into these slots.
CHAPTER 2: Checking Out Your Notebook Bottom Battery Ventilation slots and cooling fan Battery latch Battery lock Memory bay Hard drive bay Component Icon Description Battery Provides power when the notebook is not plugged into AC power. Battery Slide to release the battery. For more latch information, see “Changing batteries”...
Page 17
Component Icon Description Hard drive The hard drive is located in this bay. Ventilation Helps cool internal components. slots and Warning: Do not work with the notebook cooling fan resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin.
CHAPTER 2: Checking Out Your Notebook Keyboard area Keyboard area for select models Power button Status indicators Multimedia touch controls (optional) Keyboard Status indicators Touchpad Component Icon Description Power Press to turn the power on or off. You can also button configure the power button for Sleep/Resume mode.
Component Icon Description Illuminated Use to control playback of CDs and DVDs. The multimedia panel includes a capacitive volume control. For touch more information, see “Using the optional controls multimedia panel” on page (optional) Touchpad Provides all the functionality of a mouse. For more information, see “Using the EZ Pad...
CHAPTER3 Setting Up and Getting Started • Working safely and comfortably • Connecting the AC adapter • Connecting to a broadband modem or network • Connecting the optional dial-up modem • Starting your notebook • Turning off your notebook • Restarting (rebooting) your notebook •...
CHAPTER 3: Setting Up and Getting Started Working safely and comfortably Before using your notebook, follow these general guidelines for setting up a safe and comfortable work area and avoiding discomfort and strain: Keep hands and arms parallel to the floor. •...
Avoid focusing your eyes on your screen for long • periods of time. Every 10 or 15 minutes, look around the room, and try to focus on distant objects. Where feasible, keep your head vertical while • looking at the screen. If you use an external keyboard, raise the notebook so the top of its screen is no higher than eye level.
Caution Make sure that you use the AC adapter that came with your notebook or one of the same type purchased from Gateway. Replace the power cord if it becomes damaged. The replacement cord must be of the same type and voltage rating as the original cord or your notebook may be damaged.
Page 25
To connect the AC adapter: Connect the power cord to the AC adapter. Connect the AC adapter to your notebook’s power connector. Plug the power cord into a wall outlet. The battery charge indicator turns on (see “Front” on...
Important If the battery charge indicator does not turn orange and stop blinking after three hours, contact Gateway Customer Care at the location shown on the Customer Care label. For more information, see “Gateway contact information”...
To connect to a cable or DSL modem or to a wired Ethernet network: Insert one end of the network cable into the network jack on your notebook. When using a cable with a sleeve over the plug, pull the sleeve back to make sure that the plug locks into the jack.
Page 28
CHAPTER 3: Setting Up and Getting Started To connect the optional modem: Insert one end of the modem cable into the modem jack on your notebook. Insert the other end of the modem cable into a telephone wall jack. Important The modem will not work with digital or PBX telephone lines.
Starting your notebook Warning Do not work with the notebook resting on your lap. If the air vents are blocked, the notebook may become hot enough to harm your skin. Caution Provide adequate space around your notebook so air vents are not obstructed.
CHAPTER 3: Setting Up and Getting Started Attach and turn on any peripheral devices, such as printers, scanners, and speakers. For more information about connecting peripheral devices, see “Installing a printer or other peripheral device” on page See the documentation that came with each device for its setup instructions.
Hibernate mode is an alternative to Sleep mode. In Hibernate mode, your notebook is turned completely off. When you wake your notebook from Hibernate mode, however, the programs that were running when your notebook entered Hibernate mode are running just as you left them.
CHAPTER 3: Setting Up and Getting Started To close unresponsive programs on your notebook: Press C Windows Task Click Start Task Manager. The Manager dialog box opens. Click the program that is not responding. Click End Task. Windows Click X in the top-right corner of the Task Manager dialog box.
Indicator Icon Description LED blinking - The drive is ■ being accessed. LED off - The drive is not being ■ accessed. Wireless LED on - Connected to an ■ network optional wireless network. LED off - Disonnected to an ■...
CHAPTER 3: Setting Up and Getting Started Key types The keyboard has several different types of keys. Some keys perform specific actions when pressed alone and other actions when pressed in combination with another key. Key type Icon Description Function keys Press these keys labeled F1 to F12 to perform actions in programs.
System key combinations When you press the F key and a system key at the same time, your notebook performs the action identified by the text or icon on the key. Press and hold To... , then press this system key...
Page 36
CHAPTER 3: Setting Up and Getting Started Press and hold To... , then press this system key... Toggle the notebook display in the following order: The LCD ■ An external monitor or projector (a ■ monitor or projector must be plugged into the monitor port or HDMI port on your notebook) Both displays at the same time...
Using the EZ Pad touchpad The EZ Pad™ consists of a touchpad, two buttons, and a scroll zone. Scroll zone Touchpad Left button Right button When you move your finger on the touchpad, the pointer (arrow) on the screen moves in the same direction.
Page 38
CHAPTER 3: Setting Up and Getting Started left right buttons You can use the EZ-Pad below the touchpad to select objects. You can attach a mouse to the notebook using a USB port. You do not need to shut down the notebook to connect a USB mouse.
Page 39
To... Do this... Start a Position the program or pointer over open a file the object. or folder. Press the left button twice in rapid succession. This action is called double-clicking Access a Position the shortcut pointer over menu or the object.
CHAPTER 3: Setting Up and Getting Started Using the optional multimedia panel Multimedia panel for select models Play/Pause Stop Next Previous Capacitive volume control Mute Button Description Play/ Pause—Plays or pauses the CD or DVD. Stop—Stops playing the CD or DVD. Next—Skips ahead one CD track or DVD chapter.
Using the webcam You can use the webcam with many of the available Internet chat programs to add video and audio to your chat session. In addition, by using the software included with the webcam, you can take pictures or create video clips.
CHAPTER 3: Setting Up and Getting Started Adjusting the volume You can use the volume control to adjust the overall volume of your notebook. To adjust the overall volume level using hardware controls: If you are using external speakers, turn the knob •...
Page 43
Click and drag the slider up to increase volume and down to decrease volume. To mute the volume, click (Mute). To restore volume, click it again. To adjust device volume levels, click Mixer. The Volume Mixer dialog box opens, where you can click and drag sliders for individual devices.
CHAPTER 3: Setting Up and Getting Started Turning your wireless radio on or off Your Gateway notebook may have a factory-installed wireless radio. Warning Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current aviation regulations require wireless devices to be turned off while traveling in an airplane.
-OR- Click (Start), All Programs, Accessories then click Windows Mobility Center. When the Windows Mobility Center window opens, click Turn wireless off. For more information about using your notebook on a wireless network, see “Wireless Ethernet Networking” in your...
Page 46
CHAPTER 3: Setting Up and Getting Started...
CHAPTER4 Using Drives and Accessories • Using the DVD drive • Using an eSATA (external SATA) hard drive • Using the memory card reader • Adding and removing an Express Card • Installing a printer or other peripheral device • Viewing the display on a projector, monitor, or television...
You can use your notebook to enjoy a wide variety of multimedia features. Identifying drive types Your Gateway notebook may contain one of the following drive types. Look on the front of the drive for one or more of the following logos:...
If your drive has this This is your drive Use your drive for... logo... type... Multi-format Installing programs, double layer playing audio CDs, playing DVD±RW drive DVDs, accessing data, ROM/R/RW recording music and data to CD-R or CD-RW discs,...
Page 50
CHAPTER 4: Using Drives and Accessories Using a tray-load DVD drive Eject button Manual eject hole To insert a CD or DVD: Press the eject button on the DVD drive. After the tray opens slightly, pull the disc tray completely open.
Your notebook must be turned on to remove CDs and DVDs using this method. If you do not want to turn on your notebook, manually eject the disc by inserting an opened paper clip into the manual eject hole.
CHAPTER 4: Using Drives and Accessories Memory card types The memory card reader supports Memory Stick®, Memory Stick Pro®, MultiMediaCard™, Secure Digital™, Mini Secure Digital™, RS-MultiMediaCard™, and xD-Picture Card™. Important RS-Multimedia Card and Mini Secure Digital cards require the use of an adapter that is available with the media. Inserting a memory card To insert a memory card: Insert the memory card into the memory card slot...
To remove a memory card: Push the memory card into the notebook. The memory card pops out slightly. Pull the memory card out of the notebook. Adding and removing an Express Card Your notebook has an Express Card slot. This slot accepts one Type 54 Express Card.
CHAPTER 4: Using Drives and Accessories To remove an Express Card: Turn off your notebook, then go to step 5. -OR- Double-click the remove hardware icon in the Safely Remove Hardware taskbar. The dialog box opens. Important If the remove hardware icon does not appear on the taskbar, click the show hidden icons button.
Connecting a USB device Your notebook has USB ports for connecting devices such as a diskette drive, flash drive, printer, scanner, camera, keyboard, or mouse. Important USB devices may have special installation instructions. See your USB device’s installation guide.
CHAPTER 4: Using Drives and Accessories Viewing the display on a projector, monitor, or television You can use your notebook for giving presentations by connecting an external monitor, projector, or television to your monitor (VGA) or optional HDMI port. Your notebook supports simultaneous LCD and external display.
Page 57
Plug the other end of the VGA cable into the monitor port on your notebook. -OR- Plug the other end of the HDMI cable into the optional HDMI port on your notebook. Turn on your notebook. Plug the projector’s, monitor’s, or television’s...
CHAPTER 4: Using Drives and Accessories Press F +F4 to switch between viewing the display on the LCD panel, viewing the display on the projector, monitor, or television, and viewing the display on both the LCD panel and the projector, monitor, or television. Important If a monitor, projector, or television is connected and you close the LCD panel, your notebook may turn off the LCD...
Page 59
Display Click (Change display settings). The Settings dialog box opens. Click monitor 2. Adjust properties such as Resolution or Colors if necessary. To use the monitor, projector, or television as a “mirror” (duplicate) of the notebook display (both displays have the same content), click to deselect the check box for Extend my Windows desktop onto this monitor.
CHAPTER 4: Using Drives and Accessories Using the projector or monitor for a presentation You can configure your notebook so the settings are correct each time you give a presentation. To use a projector, monitor, or television for a presentation: Click (Start), All Programs, Accessories then...
CHAPTER5 Managing Power • Monitoring the battery charge • Recharging the battery • Changing batteries • Recalibrating the battery • Extending battery life • Changing notebook power settings...
CHAPTER 5: Managing Power Monitoring the battery charge Your new Gateway notebook is designed to provide an exceptional balance of performance and portability. Your notebook uses the latest chipset and mobile processor technologies to manage the processor speed and power consumption for a greater battery life experience.
Danger of explosion if battery is incorrectly replaced. Replace only with a battery specifically manufactured for your Gateway notebook. Discard used batteries according to local hazardous material regulations. The batteries used in this device may present a fire or chemical burn hazard if mishandled.
CHAPTER 5: Managing Power Slide the battery out of the notebook. Slide a recharged battery into the notebook until it snaps into place. Slide the battery lock to the locked position. Turn your notebook over. Open the LCD panel. Recalibrating the battery Important Do not interrupt the battery recalibration process.
Charge the battery completely. Important If, after completing this procedure, the battery charge indicator still does not show an accurate charge, contact Gateway Customer Care at the location shown on the Customer Care label. For more information, see “Gateway contact information” on...
CHAPTER 5: Managing Power Over the long term, use the battery at least once a month, even if it was kept in a cool, dry place for storage, but avoid frequent full discharges because this puts additional strain on the battery. Several partial discharges with frequent recharges are better for a lithium-ion battery than one complete discharge, and recharging a partially charged lithium-ion battery...
Close the LCD panel to turn off the display while • you are not using your notebook. The display stays off until you open the panel again. Use Hibernate mode for maximum power savings • while your notebook is not in use.
CHAPTER 5: Managing Power Changing power modes You can use the following power modes to lengthen the life of your notebook’s battery: Sleep - while your notebook is in Sleep mode, it • switches to a low power state where devices, such as the display and drives, turn off.
When in Hibernate mode, your notebook saves all memory information to the hard drive, then turns the power completely off. If your notebook ...and you want ...then is... to... Enter Sleep or Press F +F3. Hybrid Sleep mode Enter...
Page 70
CHAPTER 5: Managing Power Balanced - This is the default power plan which • balances performance and battery life. Power saver - This power plan sacrifices • performance in order to extend battery life. Use this plan if you will be away from AC power outlets for an extended period of time.
Changing advanced settings Advanced power settings let you assign different power saving modes to the power button and Sleep system key. You can also select which power saving mode is activated when you close the LCD panel. To change advanced power management settings:...
Page 72
CHAPTER 5: Managing Power Click the + in front of Sleep, then click the + in front of Allow hybrid sleep. Change the values to On for On battery and Plugged in. Help For more information about hybrid sleep, click Start, then click Help and Support.
CHAPTER6 Traveling with Your Notebook • Packing your notebook • Traveling by air • Dial-up modem • Radio frequency wireless connections • Security • Power • Additional tips...
CHAPTER 6: Traveling with Your Notebook Packing your notebook Remove all discs, express cards, peripheral • devices, and cables. Remember to pack those you will need while traveling. Pack your notebook securely into a briefcase or • hand-carried luggage, and keep it separate from toiletries, liquids, and food.
Radio frequency wireless connections Important If your notebook came equipped with an internal embedded wireless device, see “Legal Information” on page 117 for general wireless regulatory guidelines. Every country has different restrictions on the use • of wireless devices. If your notebook is equipped...
The password feature is very secure, with no easy way to recover a forgotten password. If you forget your password, you must return your notebook to Gateway for service. To create a startup password: Restart your notebook. As soon as you see a startup screen, press F2.
Important You must enter the User Password each time you turn on your notebook if it was turned off or put in hibernate mode. You do not need to enter the User Password if your notebook was put in Sleep mode.
Take your recovery discs in case you need to • install an additional driver or software. Drivers and Applications Recovery You can create a disc using the Gateway Recovery Management.
CHAPTER7 Maintaining Your Notebook • Caring for your notebook • Cleaning your notebook • Maintaining the battery • Cleaning CDs or DVDs • Recovering your system...
CHAPTER 7: Maintaining Your Notebook Caring for your notebook To extend the life of your notebook: Be careful not to bump or drop your notebook, • and do not put any objects on top of it. The case, although strong, is not made to support extra weight.
A soft, lint-free cloth • An aerosol can of air that has a narrow, • straw-like extension Cotton swabs • A DVD drive cleaning kit • Cleaning the exterior Warning When you shut down your notebook, the power turns off, but some electrical current still flows through your notebook.
CHAPTER 7: Maintaining Your Notebook Cleaning the notebook screen Caution A notebook LCD screen is made of specially coated glass and can be scratched or damaged by abrasive or ammonia-based glass cleaners. Use a soft cloth and water to clean the LCD screen. Squirt a little water on the cloth (never directly on the screen), and wipe the screen with the cloth.
Storing batteries Do not charge up the battery, then store it away. A stored battery should be used every three to four weeks. Let the battery fully discharge, then recharge to 40% if you plan to store it again. If you store a...
Recovering your system You can solve most computer problems by following the information in “Troubleshooting” on page 87 in the technical support pages at www.gateway.com. Problem solving may also involve reinstalling some or recovering all of the computer’s software (also called restoring your system).
To reinstall using discs, you must create the set of recovery discs beforehand. To create recovery discs: Click (Start), All Programs, Gateway, then click Gateway Gateway Recovery Management. Recovery Management opens. To create recovery discs for the hard drive’s entire...
Page 86
CHAPTER 7: Maintaining Your Notebook Create Backup Disc dialog box opens. This dialog box tells you the number of blank, recordable discs you will need to complete the recovery discs. Make sure that you have the required number of identical, blank discs ready before continuing.
To recover your pre-installed software and drivers: Click (Start), All Programs, Gateway, then click Gateway Gateway Recovery Management. Recovery Management opens. - OR -...
CHAPTER 7: Maintaining Your Notebook Click Contents. A list of software and device drivers opens. Click the install icon for the item you want to install, then follow the on-screen prompts to complete the installation. Repeat this step for each item you want to reinstall. Returning to a previous system condition Microsoft System Restore periodically takes “snapshots”...
Page 89
To return to a restore point: Click (Start), Control Panel, System and Maintenance, then click Backup and Restore Backup and Restore Center Center. The opens. On the left side of the window, click Repair Windows using System Restore, then click Next.
“Recovering from your recovery discs” on page Recovering from within Windows Vista To reinstall Windows Vista and all pre-installed software and drivers: Click (Start), All Programs, Gateway, then click Gateway Gateway Recovery Management. Recovery Management opens. Click the Restore tab, then click Completely Confirm Restore System to Factory Defaults.
Page 91
Recovering from the hard drive during startup To reinstall Windows Vista and all pre-installed software and drivers: Turn on your computer, then press A +F10 Gateway Recovery Management during startup. opens. Click Completely Restore System to Factory Defaults. Caution Continuing the process will erase all files on your hard drive.
Page 92
CHAPTER 7: Maintaining Your Notebook Recovering from your recovery discs To reinstall Windows Vista and all pre-installed software and drivers: Caution Before using your recovery discs, open the BIOS setup utility and enable the F12 boot menu. Turn on your computer, insert the first system recovery disc into your optical disc drive, then restart your computer.
CHAPTER 8: Troubleshooting Safety guidelines Warning Do not try to troubleshoot your problem if power cords or plugs are damaged, if your notebook was dropped, or if the case was damaged. Instead, unplug your notebook and contact a qualified computer technician. While troubleshooting your notebook, follow these safety guidelines: Never remove the memory bay cover or hard...
• If an error message appears on the screen, write • down the exact message. The message may help Gateway Customer Care in diagnosing and fixing the problem. If you added or removed peripheral devices, • review the installation procedures you performed and make sure that you followed each instruction.
CHAPTER 8: Troubleshooting Diskette drive (external) The diskette drive is not recognized Shut down and restart your notebook. • Disconnect the USB cable, then reconnect it. • You see an “Access Denied” or “Write protect” error message Move the write-protection tab in the upper-right •...
This condition is normal and inherent in the TFT • technology used in active-matrix LCD screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels are unacceptably numerous or dense on your display, contact Gateway Customer Care to identify whether a repair or replacement is justified based on the number of pixels affected.
CHAPTER 8: Troubleshooting Make sure the notebook is not in Sleep or • Hibernate mode. Press the power button. The notebook may be sending its display to an • external monitor or projector. Press F + F4 several times to toggle through the LCD panel, an external monitor or projector, or both.
Page 99
If you are using the built-in speakers, make sure • that nothing is plugged into the headphone jack on the notebook. For the location of the headphone jack, see “Front” on page If you are using powered speakers, make sure •...
CHAPTER 8: Troubleshooting Ethernet Ethernet troubleshooting is covered under “Networks (wired)” on page 107. Express Cards You installed an Express Card and now your notebook is having problems Make sure that you have correctly installed • required software for the Express Card. For more information, see your Express Card’s documentation.
Hard drive You see an “Insufficient disk space” error message Delete unnecessary files from the hard drive • using Disk Cleanup. For instructions on deleting unnecessary files, see “Deleting unnecessary User Guide files” in your online Empty the Recycle Bin by right-clicking the •...
CHAPTER 8: Troubleshooting Internet You cannot connect to the Internet If you are using a dial-up modem, make sure that • the modem cable is plugged into the optional modem jack and not the Ethernet network jack. For the location of your modem jack, see “Back”...
Connecting to a Web site takes too long Many factors can affect Internet performance: The condition of the telephone lines in your • residence or at your local telephone service The condition of the Internet computers to which •...
Windows Vista Home Premium and Windows Vista Ultimate versions. To view Media Center troubleshooting information that is not covered in this section, go to the Gateway support Web Site at www.gateway.com. Help For more information about Windows Media Center, click Start, then click Help and Support.
Page 105
Quality of video cables—Poor quality or the • incorrect type of video cables can cause problems and affect the video quality. Gateway recommends using high-quality video cables that can be purchased from Gateway. Important Cable connections must be made correctly for optimal video quality.
Page 106
For more information, review the FAQ topic at www.gateway.com. You want to change display settings to get better TV or DVD image quality Adjust the display device brightness, contrast, • hue, and saturation. For more information review the FAQ topic at www.gateway.com.
You want to know whether you can burn videos that were recorded in Media Center mode to a DVD Yes, you can. The Media Center saves recorded • videos in the DVR-MS format. You can burn a DVR-MS file to a DVD with DVD recording (burning) software, such as Power2Go, and with the Media Center itself.
CHAPTER 8: Troubleshooting You see a “Not enough memory” error message Close all programs, then restart your notebook. • Memory card reader Drive letter for the memory card slot does not appear in the My Computer window Reboot your notebook. •...
Page 109
Make sure that the modem cable is less than • 6 feet (1.8 meters) long. Remove any line splitters or surge protectors • from your telephone line, then check for a dial tone by plugging a working telephone into the telephone wall jack.
Page 110
CHAPTER 8: Troubleshooting Disconnect any answering machine, fax machine, • or printer that is on the same line as the modem. Do not connect these devices to the same telephone line as the modem. Make sure that you are not using a digital, •...
Page 111
Your 56K modem does not connect at 56K Current FCC regulations restrict actual data • transfer rates over public telephone lines to 53K. Other factors, such as line noise, telephone service provider equipment, or ISP limitations, may lower the speed even further.
CHAPTER 8: Troubleshooting Click the Diagnostic tab, then click Query Modem. If information about the modem appears, the modem passed diagnostics. If no modem information is available, a white screen appears with no data, or if you get an port already open or the modem error such as has failed to respond , the modem did not pass...
The external mouse does not work Make sure that the mouse cable is plugged in • correctly. Shut down and restart your notebook. • Remove all extension cables and switch boxes. • Try a mouse you know is working to make sure •...
Page 114
CHAPTER 8: Troubleshooting Your wired Ethernet network is running slower than you expect If your Ethernet network is running slower than • you expect, check the speed of each Ethernet component. For best results, all Ethernet components should be standard Ethernet (10 Mbps), Fast Ethernet (100 Mbps or 10/100 Mbps), or Gigabit Ethernet (1000 Mbps or 10/100/1000 Mbps).
Networks (wireless) You turned wireless networking on, but it takes a while to connect When wireless networking is turned on, it • automatically scans for available connections. The scan can take approximately 30 seconds to complete. Your connection on the network seems intermittent or...
Page 116
CHAPTER 8: Troubleshooting You are in a wireless network, you can see the network, but cannot communicate, send files, print, or get to the Web Wireless If your access point uses WEP, go to the • Networking Properties window and make sure that both the WAP and the WLAN in the computer have matching WEP keys.
You forgot your startup password The password feature (which is set in the BIOS Setup utility) is very secure, with no easy way to recover a forgotten password. You must return your notebook for repair. Call Gateway Customer Care for instructions.
CHAPTER 8: Troubleshooting Power Your notebook is not working on AC power Make sure that your AC power adapter is • connected correctly to your notebook. For instructions on connecting the AC power adapter, see “Connecting the AC adapter” on page If your notebook is plugged into a surge •...
Page 119
The printer will not turn on Make sure that the printer is online. Many • printers have an online/offline button that you may need to press. Make sure that the power cable is plugged into • an AC power source.
CHAPTER 8: Troubleshooting If the printer status is Offline, right-click the name of the printer you want to use, then click Use Printer Online to set the printer to work online. Wait until files have been printed before sending • additional files to the printer.
Make sure that the monitor is turned on and that • the video cable is connected correctly. Telephone support Before calling Gateway Customer Care If you have a technical problem with your notebook, follow these recommendations before contacting Gateway Customer Care: Make sure that your notebook is connected •...
Page 122
If you did not purchase the hardware or software from Gateway, see the manufacturer’s documentation and technical support resources. If you have “how to” questions about using a •...
No. 24 AWG) UL-listed or CSA-certified telecommunication line cord for your dialup modem connection. Your Gateway notebook is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this notebook, it is important that the safety instructions marked on the notebook and in the documentation are followed.
• The notebook was dropped or the cabinet is damaged. • The notebook performance changes. Replacement parts and accessories Use only replacement parts and accessories recommended by Gateway. Regulatory compliance statements Wireless guidance Warning Radio frequency wireless communication can interfere with equipment on commercial aircraft.
Some circumstances require restrictions on wireless devices. Caution Only use drivers approved for the country in which the device will be used. See the Gateway System Restoration Kit, or contact Gateway Customer Care for additional information. Important Every country has different restrictions on the use of wireless devices.
Page 127
These accessories are required to be used in order to ensure compliance with FCC rules. FCC declaration of conformity Caution Changes or modifications not expressly approved by Gateway could void the FCC compliance and negate your authority to operate the notebook.
Page 128
This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive harm. For additional information regarding this product warning, go to www.gateway.com/prop65. Mercury Warning Warning THE LAMP IN THIS DISPLAY CONTAINS MERCURY. DISPOSE ACCORDING TO LOCAL, STATE, AND FEDERAL LAW.
Page 129
Caution Wireless devices are not user-serviceable. Do not modify them in any way. Modification to a wireless device will void the authorization to use it. Contact Gateway for service. Caution The transmitting device embedded in this notebook may not be used with any antenna other than provide with the notebook.
Page 130
APPENDIX A: Legal Information As a general guideline, a separation of 8 inches (20 cm) between the wireless device and the body, for use of a wireless device near the body (this does not include extremities) is typical. This device should be used more than 8 inches (20 cm) from the body when wireless devices are on.
To prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD drive. All Gateway systems equipped with CD and DVD drives comply with the appropriate safety standards, including IEC 825. The laser devices in these components are classified as “Class 1 Laser Products”...
Page 132
• In some cases, your “end of life” product may be “traded in” for credit towards the purchase of new Gateway equipment. Call Gateway to see if this program is available in your area. • If you need further assistance in recycling, reusing, or trading in your “end of life”...
Page 133
Trademark Acknowledgments Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered trademarks of Intel Corporation. Microsoft, MS, and Windows are trademarks or registered trademarks of Microsoft Corporation. All other product names mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.
Index icons installing AC adapter latch connecting life span connector locating international adapters managing power maximizing accessories performance safety precautions monitoring charge acoustic handset coupler recalibrating application key recharging release latch arrow keys replacing audio storing adjusting volume troubleshooting back button bays headphone jack battery...
Page 136
Index cards cable modem Express Card slot dial-up modem inserting Express Card DSL modem external keyboard inserting memory card external monitor keyboard memory card slot mouse memory cards printer supported projector removing Express Card scanner television removing memory card to wired Ethernet USB device slots video camera...
Page 137
DSL modem adjusting volume connecting diagnostics troubleshooting dialing properties troubleshooting cleaning using while traveling controlling playback digital audio eject button digital camera inserting memory card reader manual eject hole playing USB port...
Page 138
Internet function keys troubleshooting Internet chat program Gateway contact information jacks model number connections serial number Support Gateway Recovery Center Kensington cable lock re-installing drivers lock slot re-installing programs key combinations keyboard re-installing software buttons cleaning connecting features hard drive...
Page 139
LCD/CRT troubleshooting navigation using Sleep microphone system jack system key Microsoft Certificate of combinations Authenticity toggle display model number Windows modem wireless Ethernet cable connecting dial-up labels Microsoft Certificate of international adapter Authenticity model number jack (dial-up) serial number...
Page 140
Index battery button network jack changing modes networking changing plans turning off Bluetooth connector conserving battery turning off wireless power Ethernet EmPower adapter turning on Bluetooth extending battery life turning on wireless Hibernate mode Ethernet Hybrid Sleep mode NTSC/PAL jack indicator international adapter opening...
Page 141
Gateway Recovery sitting at computer Center scanner with Windows System installing Restore USB port Recycle Bin screen deleting files resolution emptying...
Page 142
Index sound playing DVD on adjusting viewing display on controls touchpad muting buttons troubleshooting clicking speakers double-clicking jack dragging screen objects SpeedStep technology locating starting moving pointer notebook moving screen objects programs startup password opening files, folders, status indicator and programs wireless Ethernet opening shortcut menu status indicators...
Page 143
Web site connection speed Windows wired Ethernet...
Page 145
Contacter le service d’assistance clientèle Gateway ........2 Modèle Gateway et numéro de série .
Page 146
Sommaire Arrêt de votre ordinateur portable ... . . 25 Redémarrage (réinitialisation) de l’ordinateur portable ........26 Utilisation des voyants d’état .
Page 147
Chapitre 5 : Gestion de l’alimentation ..59 Contrôle de la charge de la batterie ... . 60 Recharge de la batterie ..... . . 61 Remplacer la batterie .
Page 148
Sommaire Création de disques de récupération ..86 Récupération des logiciels et des pilotes préinstallés ......89 Revenir à...
Page 149
Avant d’appeler le service d’assistance clientèle Gateway ......128 Annexe A : Informations légales ..131...
CHAPITRE1 À propos de ce guide • À propos de ce guide • Accès à votre Manuel de l’utilisateur en ligne • Coordonnées de Gateway • Certificat d’authenticité Microsoft • Pour plus d’informations...
À propos de ce guide Ce guide contient des informations et des instructions de maintenance qui sont spécifiques à votre modèle d’ordinateur portable Gateway. Pour de plus amples informations sur tous les autres modèles, veuillez Manuel de l’utilisateur consulter votre en ligne.
Pour plus d’informations sur votre ordinateur Support portable, visitez la page de Gateway à www.gateway.com ou à l’adresse Web indiquée sur l’étiquette de votre ordinateur portable. La page Support contient également des liens pour obtenir de la documentation complémentaire de Gateway et des spécifications détaillées.
CHAPITRE 2 : Vérification de votre ordinateur portable Avant Lecteur de carte Voyant Voyant de charge de la batterie mémoire d’alimentation Composant Icône Description Voyant DEL allumée - l’ordinateur portable est ■ d’alimentation allumé. DEL clignotante - l’ordinateur portable ■ est en mode de veille ou de veille hybride.
Gauche Connecteur Prise Prise de Port de Logement de Port d’alimentation moniteur Prise Ethernet sortie carte Express eSATA HDMI Prise de Prise pour (en option) (en option) microphone casque d’écoute Composant Icône Description Connecteur Branchez le câble d’adaptateur c.a. dans d’alimentation...
Page 158
CHAPITRE 2 : Vérification de votre ordinateur portable Composant Icône Description Prise pour Branchez les haut-parleurs amplifiés ou casque d’écoute les casques d’écoute dans cette prise. Les haut-parleurs intégrés sont éteints lorsque les haut-parleurs ou les casques d’écoute sont branchés dans la prise. Casque avec support SPDIF ■...
Droite Prise de Sécurité Port USB Lecteur DVD modem Kensington Composant Icône Description Port USB Branchez un périphérique USB (p. ex., lecteur de disquette, lecteur flash, imprimante, numériseur, caméra, clavier ou souris) dans ce port. Lecteur DVD Insérez des CD ou des DVD dans ce lecteur.
CHAPITRE 2 : Vérification de votre ordinateur portable Arrière Ventilateur Composant Description Ventilateur Aide à refroidir les composants internes. Avertissement : Ne travaillez pas en laissant l’ordinateur portable sur vos genoux. Si les trous d’aération sont bloqués, l’ordinateur portable peut devenir suffisamment chaud pour endommager votre peau.
Batterie Ventilateur Loquet de batterie Verrou de batteriee Baie de mémoire Baie de disque dur Composant Icône Description Batterie Assure l’alimentation lorsque l’ordinateur portable n’est pas branché à une prise c.a. Loquet de Faites glisser pour dégager la batterie.
CHAPITRE 2 : Vérification de votre ordinateur portable Composant Icône Description Baie de Le(s) disque(s) dur(s) se trouve(nt) dans cette disque dur baie. Ventilateur Aide à refroidir les composants internes. Avertissement : Ne travaillez pas en laissant l’ordinateur portable sur vos genoux. Si les trous d’aération sont bloqués, l’ordinateur portable peut devenir suffisamment chaud pour endommager votre peau.
Page 163
Composant Icône Description Bouton Appuyez pour mettre l’appareil sous tension et d’alimentat hors tension Vous pouvez également configurer le bouton d’alimentation en mode veille/reprise. Pour obtenir plus d’informations sur la configuration du mode du bouton d’alimentation, consultez « Modification des paramètres avancés »...
CHAPITRE 2 : Vérification de votre ordinateur portable Écran ACL Microphone Webcam (en option) Composant Description Webcam Permet de voir ceux qui communiquent avec vous lors (en option) des appels VoIP. Pour obtenir plus d’informations, consultez « Utiliser la webcam » page Microphone À...
Page 165
CHAPITRE3 Installation et initiation • Travailler confortablement et en toute sécurité • Branchement de l’adaptateur c.a. • Connexion à un modem haut débit ou un réseau • Branchement du modem commuté en option • Démarrage de l’ordinateur portable • Arrêt de votre ordinateur portable •...
CHAPITRE 3 : Installation et initiation Travailler confortablement et en toute sécurité Avant d’utiliser votre ordinateur portable, lisez les consignes suivantes concernant la préparation d’une zone de travail confortable et sûre, visant à éviter tout inconfort ou fatigue. Les mains et les bras doivent être parallèles au sol •...
Positionnez le bureau et l’écran de sorte à éviter • les reflets sur votre écran et les rayonnements directs dans vos yeux. Réduisez les reflets en installant des stores ou des rideaux sur les fenêtres et un filtre antireflet.
CHAPITRE 3 : Installation et initiation Position devant l’ordinateur portable Évitez de plier, de cambrer ou d’incliner vos • poignets. Assurez-vous qu’ils sont dans une position détendue lorsque vous tapez. Évitez de vous avachir. Asseyez-vous bien droit de • façon à ce que vos genoux, vos hanches et vos coudes forment un angle droit lorsque vous travaillez.
Page 169
Mise en garde Veillez à utiliser l’adaptateur c.a. fourni avec votre ordinateur portable ou un adaptateur du même type vendu chez Gateway. Remplacez le cordon d’alimentation s’il est endommagé. Le cordon d’alimentation doit être de même type et de même tension nominale que le cordon d’origine, sans quoi votre ordinateur...
Si le voyant de charge de la batterie ne devient pas bleu et n’arrête pas de clignoter au bout de trois heures, contactez le service clientèle de Gateway à l’endroit imprimé sur l’étiquette au bas de votre ordinateur portable. Pour obtenir plus d’informations, consultez...
Connexion à un modem haut débit ou un réseau Votre ordinateur portable est équipé d’une prise réseau pouvant servir à un branchement à un modem câble ou DSL ou à un réseau Ethernet. Pour brancher un modem câble/DSL ou à un réseau Ethernet câblé...
CHAPITRE 3 : Installation et initiation Branchement du modem commuté en option Votre ordinateur portable peut être équipé d’un modem de 56 Kbit/s intégré à brancher à une ligne téléphonique standard. Avertissement Afin de réduire les risques d’incendie, utilisez uniquement un cordon d’alimentation pour télécommunications répertorié...
Démarrage de l’ordinateur portable Avertissement Ne travaillez pas avec l’ordinateur portable sur vos genoux. Si les trous d’aération sont bloqués, l’ordinateur portable peut devenir suffisamment chaud pour endommager votre peau. Mise en garde Laissez suffisamment d’espace autour de votre ordinateur portable pour ne pas obstruer les orifices d’aération.
CHAPITRE 3 : Installation et initiation Branchez et allumez les périphériques éventuels, comme une imprimante, un scanneur ou des haut-parleurs. Astuce Pour plus d’informations sur le branchement de périphériques, consultez « Installation d’une imprimante ou d’un autre périphérique » page Astuce Consultez la documentation fournie avec chaque périphérique pour leurs instructions d’installation.
Arrêt de votre ordinateur portable La mise de votre ordinateur portable en mode de veille est la méthode la plus facile d’arrêter votre ordinateur. L’ordinateur ne sera pas totalement hors tension, mais il désactive ou ralentit la plupart des opérations du système d’exploitation pour économiser l’énergie.
CHAPITRE 3 : Installation et initiation Pour mettre votre ordinateur portable hors tension : Cliquez sur (Démarrer), cliquez sur la flèche à • côté de l’icône de verrouillage, puis sur Arrêter. L’ordinateur portable s’éteint. Important Si vous ne pouvez pas vous servir de l’option Arrêter dans Windows pour éteindre votre ordinateur, appuyez sur le bouton d’alimentation et tenez-le enfoncé...
Pour redémarrer votre ordinateur portable : Cliquez sur (Démarrer), cliquez sur la flèche à • côté de l’icône de verrouillage, puis sur Redémarrer. L’ordinateur portable s’éteint, puis se rallume. Important Si votre ordinateur portable ne s’éteint pas immédiatement, effectuez les étapes suivantes jusqu’à ce qu’il s’éteigne :...
Page 178
CHAPITRE 3 : Installation et initiation Bluetooth Réseau sans fil Verr Maj Voyant Icône Description Diode clignotante - Le lecteur ■ ’ è est en cours d Diode éteinte - Le lecteur ■ ’ est pas accédé. Réseau DEL allumée - Connecté à un ■...
Utilisation du clavier Votre ordinateur portable comporte un clavier pleine dimension qui fonctionne de la même manière qu’un clavier d’ordinateur de bureau. Un grand nombre de touches ont été attribuées à d’autres fonctions, incluant des touches de raccourci pour Windows, des touches de fonction pour des opérations propres au...
Page 180
CHAPITRE 3 : Installation et initiation Type de Icône Description touche Touches de Appuyez sur les touches F1 à F12 fonction pour exécuter les tâches des programmes. Par exemple, en appuyant sur F1 vous pouvez ouvrir la fonction d’aide. Chaque programme utilise différentes touches de fonction à...
Combinaisons de touches du système Lorsque vous appuyez sur la touche F et une touche système en même temps, votre ordinateur portable exécute la tâche identifiée par le texte ou l’icône sur la touche. Appuyez sur F Pour... et tenez cette touche enfoncée, puis...
Page 182
CHAPITRE 3 : Installation et initiation Appuyez sur F Pour... et tenez cette touche enfoncée, puis appuyez sur cette touche de système... Entrer en mode de veille ou mode de veille hybride. Appuyez sur le bouton de mise sous tension pour quitter le mode de veille.
Appuyez sur F Pour... et tenez cette touche enfoncée, puis appuyez sur cette touche de système... Augmenter la luminosité de l’écran ACL au-dessus du niveau normal. Utilisez cette fonction dans des situations de grande luminosité, par exemple dehors au soleil.
Page 184
CHAPITRE 3 : Installation et initiation Lorsque vous déplacez votre doigt sur le pavé tactile, pointeur (flèche) sur l’écran se déplace dans la même direction. Vous pouvez vous servir de la zone de défilement pour faire défiler les documents. L’utilisation de la zone de défilement varie d’un programme à...
Page 185
Pour... Faites ceci... Déplacer le Déplacez votre doigt sur le pavé pointeur sur tactile. Si vous l’écran. n’avez pas suffisamment de place et que vous désirez bouger le pointeur plus loin, levez votre doigt et placez- le au centre du pavé...
Page 186
CHAPITRE 3 : Installation et initiation Pour... Faites ceci... Accéder à un Positionnez le menu de pointeur sur raccourcis ou l’objet. trouver un Appuyez complément rapidement puis d’informatio relâchez le n sur un bouton droit cliquer objet à une fois. C’est ce l’écran.
Utilisation du panneau multimédia en option Panneau multimédia pour certains modèles Lecture/Pause Arrêt Saut vers l’avant Saut vers l’arrière Contrôle du volume capacitif Mise en sourdine du son Button Description Lecture/Pause — Lancer ou interrompre la lecture du CD ou DVD.
CHAPITRE 3 : Installation et initiation Button Description Contrôle du volume capacitif — Faites glisser le doigt sur la bande de détection du volume pour régler le volume. Pour augmenter le volume, allez du – au +. Pour diminuer le volume, allez du + au –. Astuce : Vous pouvez commencer à...
Réglage de la luminosité Pour régler la luminosité de l’écran : Utilisez les touches de clavier permettant • d’augmenter et de diminuer la luminosité. Pour obtenir plus d’informations, consultez « Combinaisons de touches du système » page - OU - Cliquez sur (Démarrer), Tous les programmes,...
Page 190
CHAPITRE 3 : Installation et initiation Utilisez le bouton de mise en sourdine et le contrôle du volume capacitif sur le panneau multimédia en option. Pour obtenir plus d’informations, consultez « Utilisation du panneau multimédia en option » page - OU - Cliquez sur (Démarrer), Tous les programmes, Accessoires...
Activation et désactivation de la radio sans fil Il est possible que votre ordinateur portable Gateway soit équipé d’une radio sans fil pré-chargée. Avertissement Une communication sans fil à fréquence radioélectrique peut interférer avec un équipement à...
CHAPITRE 3 : Installation et initiation Avertissement Dans des environnements où le risque d’interférence avec d’autres appareils ou services est dangereux ou perçu comme étant dangereux, la possibilité d’utiliser un appareil sans fil peut être limitée, voire exclue. Les aéroports, les hôpitaux et les endroits à haute teneur en oxygène ou en gaz inflammable sont des exemples d’endroits où...
Désactivation de la radio sans fil IEEE 802.11 Il est fortement conseillé de désactiver la radio sans fil IEEE 802.11 quand vous voyagez par avion pour empêcher son activation par mégarde en cours de vol. Radio Bluetooth Votre ordinateur peut être équipé d’une radio Bluetooth pour communiquer avec un autre périphérique Bluetooth, tel qu’une imprimante, un...
Page 194
CHAPITRE 3 : Installation et initiation...
Page 195
CHAPITRE4 Utilisation de lecteurs et d’accessoires • Utilisation du lecteur DVD • Utilisation d’un disque dur eSATA (SATA externe) • Utilisation du lecteur de carte mémoire • Ajouter et retirer une ExpressCard • Installation d’une imprimante ou d’un autre périphérique •...
à une vaste gamme de caractéristiques multimédias. Identification de types de lecteur Votre ordinateur portable Gateway peut être équipé d’un des types de lecteur suivants. Cherchez à l’avant du lecteur un des logos suivants : Si votre lecteur a Ceci est votre Utilisez votre lecteur pour...
Si votre lecteur a Ceci est votre Utilisez votre lecteur pour... ce logo... type de lecteur... Lecteur Installation de programmes, DVD±RW lecture de CD audio, lecture de double couche DVD, accès à des données, ROM/R/RW multiformat enregistrement de musique et de données sur disques CD-R ou...
Page 198
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Astuce Pour obtenir plus d’informations sur le nettoyage d’un CD ou d’un DVD, consultez « Nettoyage des CD ou des DVD » page Utilisation d’un lecteur DVD à chargement par plateau Bouton Orifice d’éjection d’éjection manuelle...
Pour retirer un CD ou un DVD : Appuyez sur le bouton d’éjection du lecteur DVD. Une fois le plateau légèrement ouvert, tirez le plateau du disque pour l’ouvrir complètement. Soulevez avec soin le disque par ses bords jusqu’à...
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Utilisation du lecteur de carte mémoire Il vous est possible d’utiliser des cartes mémoire pour le transfert de photos d’une caméra numérique vers votre ordinateur portable. Vous pouvez également utiliser le lecteur de carte mémoire pour le transfert de données entre votre ordinateur portable et un appareil qui se sert de cartes mémoire, tel qu’un PDA, un lecteur MP3 ou un téléphone cellulaire.
Utilisation d’une carte mémoire Accéder à un fichier sur une carte mémoire : Cliquez sur (Démarrer), puis sur Ordinateur. Double-cliquez sur la lettre du lecteur (par exemple, le lecteur E:), puis double-cliquez sur le nom du fichier. Retrait d’une carte mémoire Important N’utilisez pas l’icône...
Page 202
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Pour insérer une carte Express : Poussez la carte fermement dans le logement de • la carte Express en prenant soin de mettre le côté avec l’étiquette face vers le haut jusqu’à ce que le rebord extérieur de la carte soit à...
Installation d’une imprimante ou d’un autre périphérique Votre ordinateur est doté d’un ou de plusieurs des ports suivants : Universal Serial Bus (USB) et HDMI (audio/vidéo numérique). Ces ports permettent de connecter des périphériques tels que des imprimantes, des scanneurs et des appareils photo numériques à...
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Pour brancher votre périphérique USB à l’ordinateur portable : Branchez une extrémité du câble USB à votre périphérique. Branchez l’autre extrémité du câble au port sur votre ordinateur portable. Visualisation de l’affichage sur un projecteur, moniteur ou téléviseur Vous pouvez vous servir de votre ordinateur portable...
Page 205
Si vous utilisez le port VGA, connectez une extrémité du câble VGA au moniteur, projecteur ou téléviseur. - OU - Si vous utilisez le port HDMI, connectez une extrémité du câble HDMI au moniteur, projecteur ou téléviseur. Branchez l’autre extrémité du câble VGA dans le...
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Branchez le cordon d’alimentation du projecteur, du moniteur ou du téléviseur dans la source d’alimentation c.a. et allumez l’appareil. Windows reconnaît le nouveau matériel et la Nouvel affichage détecté boîte de dialogue s’ouvre.
Cliquez sur le moniteur 2. Ajustez les propriétés telles que Résolution d’écran ou Couleurs au besoin. Pour utiliser le moniteur, projecteur ou téléviseur externe en tant qu’image « miroir » (copie) de l’écran de l’ordinateur portable (les deux écrans ont le même contenu), cliquez pour désactiver la...
Page 208
CHAPITRE 4 : Utilisation de lecteurs et d’accessoires Pour utiliser un projecteur, moniteur ou téléviseur pour faire une présentation : Cliquez sur (Démarrer), Tous les programmes, Accessoires puis cliquez sur Centre de mobilité Centre de mobilité Windows. La fenêtre Windows s’ouvre.
Page 209
CHAPITRE5 Gestion de l’alimentation • Contrôle de la charge de la batterie • Recharge de la batterie • Remplacer la batterie • Recalibrage de la batterie • Prolongation de la durée de la batterie • Modification des paramètres d’alimentation de l’ordinateur portable...
CHAPITRE 5 : Gestion de l’alimentation Contrôle de la charge de la batterie Votre nouvel ordinateur portable est conçu pour offrir un équilibre exceptionnel entre rendement et portabilité. Il utilise les plus récentes technologies de jeu de puces et de processeur mobile pour gérer la consommation et la vitesse du processeur et prolonger ainsi la durée de la batterie.
Danger d’explosion si la batterie est remplacée de façon inadéquate. Ne remplacez que par une batterie fabriquée spécialement pour votre ordinateur portable Gateway. Jetez les batteries usagées conformément aux règlements locaux sur les matières dangereuses. La batterie utilisée dans cet appareil peut présenter un risque d’incendie ou de brûlure chimique en cas de mauvaise manipulation.
CHAPITRE 5 : Gestion de l’alimentation Faites glisser le verrou de batterie à la position déverrouillée, puis faites glisser le loquet de blocage de la batterie. Retirez la batterie de l’ordinateur. Faites glisser une batterie rechargée dans l’ordinateur jusqu’à ce qu’elle se mette en place. Faites glisser le verrou de batterie à...
Page 213
Si votre ordinateur portable passe subitement au mode de veille lorsque vous l’utilisez, mais que la charge de la batterie n’est pas faible, vous devez peut- être recalibrer la batterie. Vous devriez également recalibrer régulièrement la batterie pour maintenir la précision des jauges de batterie.
Si, après avoir terminé la procédure, le voyant de charge de la batterie n’indique pas une recharge exacte, contactez le service clientèle de Gateway à l’endroit imprimé sur l’étiquette au bas de votre ordinateur portable. Pour obtenir plus d’informations, consultez «...
Page 215
Désactivez le réseau sans fil et Bluetooth. • Réduisez la luminosité de l’affichage autant que • possible. Débranchez tous les périphériques externes, • comme les périphériques USB. Retirez les cartes Express lorsque vous n’en avez • pas besoin. Bon nombre de cartes Express utilisent une petite quantité...
CHAPITRE 5 : Gestion de l’alimentation Utilisation d’autres sources d’alimentation Pour prolonger la durée de la batterie, utilisez autant que possible d’autres sources d’alimentation. Pour les voyages internationaux, emportez des • adaptateurs électriques. Économisez la batterie pour les moments où vous ne pourrez pas utiliser un adaptateur d’alimentation.
Page 217
Veille hybride - lorsque votre ordinateur portable • est en veille hybride, il passe à un état d’alimentation faible où les dispositifs, tels que l’affichage et les lecteurs, se mettent hors tension comme l’état de veille. L’ordinateur inscrit toutes les informations se trouvant actuellement en mémoire (RAM) sur le disque dur, tout comme le...
CHAPITRE 5 : Gestion de l’alimentation Si votre ... et que vous ... alors ordinateur voulez... portable est... Allumé Entrer en Appuyez sur F +F3. mode de veille ou veille hybride Allumé Entrer en Cliquez sur mode de veille (Démarrer), cliquez prolongée sur la flèche à...
Modification du mode de gestion de l’alimentation modes d’alimentation (groupes de paramètres d’alimentation) vous permettent de modifier les options d’économie d’énergie, telles que le moment où l’écran ou le disque dur sont automatiquement arrêtés. Vous pouvez sélectionner un des modes de gestion de l’alimentation définis ou créer un mode...
Page 220
CHAPITRE 5 : Gestion de l’alimentation Pour modifier le mode de gestion de l’alimentation, procédez comme suit : Cliquez sur (Démarrer), Tous les programmes, Accessoires puis cliquez sur Centre de mobilité Centre de mobilité Windows. La fenêtre Windows s’ouvre. Cliquez sur (Modifier les paramètres Sélectionner un d’alimentation).
Modification des paramètres avancés paramètres d’alimentation avancés vous permettent d’affecter au bouton d’alimentation et à la touche système Veille différents modes d’économie d’énergie. Vous pouvez également sélectionner le mode d’économie d’énergie à activer lorsque vous fermez l’écran AC. Pour modifier les paramètres avancés de la gestion de l’alimentation, procédez comme suit :...
Page 222
CHAPITRE 5 : Gestion de l’alimentation Entrer en mode de veille hybride : Sélectionner un mode Dans la fenêtre d’alimentation , cliquez sur Modifier les paramètres pour le mode que vous utilisez. Modifier les paramètres du mode La fenêtre s’ouvre. Cliquez sur Modifier les paramètres d’alimentation avancés.
Page 223
CHAPITRE6 Voyager avec votre ordinateur portable • Emballer votre ordinateur portable • Voyage en avion • Modem commuté • Connexions sans fil à fréquence radioélectrique • Sécurité • Alimentation • Autres conseils...
CHAPITRE 6 : Voyager avec votre ordinateur portable Emballer votre ordinateur portable Enlevez tous les disques, cartes réseau, • périphériques et câbles. Pensez à emballer ceux dont vous aurez besoin pendant votre voyage. Emballez adéquatement votre ordinateur • portable dans un porte-documents ou un bagage à...
Emmenez un dispositif de protection de ligne • téléphonique. Emmenez un testeur de ligne téléphonique pour • tester les lignes douteuses, spécialement si vous voyagez à l’étranger. Emmenez vos informations d’accès à distance • pour pouvoir vous connecter à votre fournisseur d’accès lorsque vous êtes en dehors de votre zone...
Si vous oubliez votre mot de passe, vous devez retourner votre ordinateur portable au service de réparation de Gateway. Pour créer un mot de passe de démarrage : Redémarrez l’ordinateur. Dès que vous voyez apparaître un écran de démarrage, appuyez...
Important Vous devez saisir le mot de passe de superviseur chaque fois que vous entrez dans l’utilitaire de configuration BIOS. Sélectionnez Définir un mot de passe d’utilisateur, puis appuyez sur Entrée et suivez les instructions. Il s’agit du mot de passe que vous devez saisir au démarrage.
Emmenez vos disques de récupération au cas où • vous devriez installer un pilote ou un programme supplémentaire. Astuce Récupération de pilotes Vous pouvez créer un disque et d’applications en utilisant la procédure figurant dans le Gateway Recovery Management (Centre de récupération Gateway).
Page 229
CHAPITRE7 Maintenance de votre ordinateur portable • Entretien de votre ordinateur portable • Nettoyage de votre ordinateur portable • Maintenance de la batterie • Nettoyage des CD ou des DVD • Récupération du système...
CHAPITRE 7 : Maintenance de votre ordinateur portable Entretien de votre ordinateur portable Pour prolonger la durée de vie de votre ordinateur portable, procédez comme suit : Prenez soin de ne pas cogner ou laisser tomber • votre ordinateur portable et de ne poser aucun objet dessus.
Ne bloquez pas les fentes du ventilateur. Si les • logements sont bloqués, votre ordinateur portable peut surchauffer, ce qui peut résulter en un arrêt imprévu de l’appareil ou en des dommages permanents à l’ordinateur. Lorsque vous rangez votre ordinateur portable •...
CHAPITRE 7 : Maintenance de votre ordinateur portable Votre ordinateur portable est refroidi par l’air qui circule par les orifices de ventilation du boîtier. Par conséquent, maintenez ces orifices exempts de toute poussière. Lorsque votre ordinateur portable est éteint et débranché, enlevez la poussière des orifices de ventilation avec un chiffon humide.
Maintenance de la batterie La durée de vie d’une batterie d’ordinateur portable est d’environ 1,5 à 3 ans dans des conditions normales. Lorsque la batterie commencera à être défectueuse, vous devrez la recharger plus fréquemment car elle ne pourra plus conserver l’énergie après une recharge totale.
CHAPITRE 7 : Maintenance de votre ordinateur portable Rangement des batteries Ne chargez pas complètement la batterie avant de la ranger. Une batterie rangée doit être utilisée toutes les trois ou quatre semaines. Déchargez complètement la batterie, puis chargez-la à 40 % avant de la ranger. Si vous rangez la batterie sans l’utiliser pendant plus de trois ou quatre semaines, la batterie risque de se décharger complètement car son circuit consomme de...
« Dépannage » page 99 ou les pages du support technique sur le site www.gateway.com. La résolution des problèmes peut également impliquer la réinstallation d’une partie ou de l’ensemble des logiciels de l’ordinateur (également appelée récupération...
CHAPITRE 7 : Maintenance de votre ordinateur portable Effectuez des corrections mineures. Si seuls un ou deux composants logiciels ou matériels sont défectueux, le problème peut être résolu en réinstallant les logiciels ou les pilotes de périphériques concernés. Pour récupérer des logiciels ou des pilotes préinstallés à...
Page 237
Pour créer vos disques de récupération : Cliquez sur (Démarrer), Tous les programmes, Gateway, puis sur Gateway Recovery Gateway Recovery Management. La fenêtre Management s’ouvre. Pour créer des disques de récupération pour le contenu d’origine du disque dur, y compris Windows Vista et tous les logiciels et pilotes installés en usine, cliquez sur Créer le disque par...
Page 238
CHAPITRE 7 : Maintenance de votre ordinateur portable Créer l’image de sauvegarde La boîte de dialogue s’ouvre. Cette boîte de dialogue s’ouvre, vous indiquant le nombre de disques vierges inscriptibles nécessaires pour compléter le jeu de disques de récupération. Assurez-vous que vous disposez bien du nombre de disques vierges identiques requis avant de continuer.
Pour récupérer des logiciels et des pilotes préinstallés : Cliquez sur (Démarrer), Tous les programmes, Gateway, puis sur Gateway Recovery Gateway Recovery Management. La fenêtre Management s’ouvre. - OU - Si vous effectuez la récupération à partir de votre disque de récupération d’applications et de...
Cliquez sur l’onglet Restore (Restaurer) puis cliquez sur Reinstall Drivers or Applications (Réinstaller les applications/pilotes). Le menu Gateway Application Recovery principal (Récupération d’applications Gateway) s’ouvre. Cliquez sur Contents (Contenu). Une liste des logiciels et des pilotes de périphériques s’affiche. Cliquez sur l’icône d’installation pour l’élément que vous souhaitez installer et suivez...
Page 241
Windows crée automatiquement un point de restauration additionnel chaque jour ainsi que chaque fois que vous installez des logiciels ou des pilotes de périphérique. Aide Pour de plus amples informations sur l’option Restauration de système de Microsoft, cliquez sur Démarrer, puis sur Aide et support.
Page 242
CHAPITRE 7 : Maintenance de votre ordinateur portable Sur le côté gauche de la fenêtre, cliquez sur Réparer Windows en utilisant la Restauration du système, puis sur Suivant. La boîte de dialogue Choisir un point de restauration s’ouvre. Cliquez sur le point de restauration souhaité, cliquez sur Suivant, puis sur Terminer.
Récupération à partir de Windows Vista Pour réinstaller Windows Vista et tous les logiciels et les pilotes préinstallés : Cliquez sur (Démarrer), Tous les programmes, Gateway, puis sur Gateway Recovery Gateway Recovery Management. La fenêtre Management (Centre de récupération Gateway)
Page 244
Cliquez sur OK. Le processus de récupération commence par redémarrer votre ordinateur avant de copier les fichiers sur votre disque dur. Ce processus peut prendre plusieurs minutes, Gateway Recovery Management mais l’écran de affichera la progression. À la fin de la récupération, une boîte de dialogue vous invite à...
Page 245
Récupération à partir du disque dur lors du démarrage Pour réinstaller Windows Vista et tous les logiciels et les pilotes préinstallés : Allumez votre ordinateur, puis appuyez sur Gateway Alt+F10 lors du démarrage. La fenêtre Recovery Management s’ouvre. Cliquez sur Completely Restore System to Factory Default (Restauration du système aux valeurs par...
Page 246
CHAPITRE 7 : Maintenance de votre ordinateur portable...
Page 247
CHAPITRE8 Dépannage • Directives de sécurité • Premières étapes • Dépannage • Support par téléphone...
CHAPITRE 8 : Dépannage Directives de sécurité Avertissement N’essayez pas d’effectuer un dépannage si les fiches ou cordons d’alimentation sont endommagés, si vous avez laissé tomber votre ordinateur portable ou si le boîtier a subi des dommages. Débranchez plutôt votre ordinateur et contactez un technicien en informatique qualifié.
Si un message d’erreur apparaît à l’écran, prenez • note du message exact. Le message peut aider le service d’assistance clientèle de Gateway à poser le diagnostic et à résoudre le problème. Si vous avez ajouté ou retiré des périphériques, •...
CHAPITRE 8 : Dépannage Lecteur de disquettes (externe) Le lecteur de disquettes n’est pas reconnu Arrêtez et redémarrez votre ordinateur portable. • Déconnectez le câble USB au lecteur puis • reconnectez-le. Le message d’erreur « Accès refusé » ou « Protection en écriture »...
Si vous pensez que ces pixels sont trop nombreux ou denses sur votre affichage, contactez le service d’assistance clientèle de Gateway pour déterminer si une réparation ou un remplacement est justifié, selon le nombre de pixels en question.
CHAPITRE 8 : Dépannage L’affichage est blanc Réglez la luminosité à l’aide des clés système ou • depuis le Centre de mobilité Windows. Pour de plus amples informations sur le réglage de la luminosité, reportez-vous à la section « Réglage de la luminosité...
Page 253
Un CD audio ne produit pas de son Assurez-vous que l’étiquette du disque est • orientée vers le haut et essayez de nouveau. Certains CD musicaux comportent un logiciel de • protection contre la copie. Vous ne pouvez peut- être pas lire ces CD sur votre ordinateur portable.
CHAPITRE 8 : Dépannage Assurez-vous que le code régional du disque et • celui du lecteur de DVD correspondent. Assurez-vous qu’un programme de lecteur de • DVD a été installé dans votre ordinateur portable. Pour obtenir plus d’informations sur la lecture d’un DVD, consultez «...
Gestion de fichiers Un fichier a été supprimé par accident Récupérez le fichier de la Corbeille en suivant les • instructions de la section « Suppression de Manuel de fichiers et de dossiers » de votre l’utilisateur en ligne.
CHAPITRE 8 : Dépannage Vous voyez apparaître un message « Erreur de données » Une zone défectueuse du disque dur peut être à • l’origine de ce problème. Pour régler les problèmes de disque dur, exécutez le programme de vérification d’erreur. Pour obtenir des instructions sur la résolution des problèmes de disque dur, consultez «...
Page 257
Assurez-vous que votre compte auprès du • fournisseur de services Internet (FSI) est bien configuré. Pour obtenir de l’aide, contactez le service d’assistance technique du FSI. Aide Pour plus d’informations sur le dépannage des connexions Internet, cliquez sur Démarrer puis sur Aide et support.
CHAPITRE 8 : Dépannage Clavier Un caractère du clavier se répète ou vous voyez apparaître un message d’erreur « Clavier bloqué » ou « Touche défectueuse » Assurez-vous que rien ne repose sur le clavier. • Assurez-vous qu’une touche n’est pas bloquée. •...
Intégrale. Pour afficher des informations de dépannage de Media Center non couvertes dans cette section, visitez le site Web de support technique de Gateway à l’adresse www.gateway.com. Aide Pour de plus amples informations sur Windows Media Center, cliquez sur Démarrer puis sur Aide et support. Tapez les mots clés Media Center dans le champ Rechercher et appuyez ensuite sur Entrée.
Page 260
Qualité des câbles vidéo—Des câbles vidéo de • basse qualité ou de type incorrect peuvent causer des problèmes et affecter la qualité vidéo. Gateway recommande d’utiliser des câbles vidéo de haute qualité disponibles de marque Gateway. Important Le raccordement des câbles doit être correct pour assurer une qualité...
Page 261
Taille du périphérique d’affichage—Les • moniteurs d’ordinateur de petite taille pour les applications informatiques standard ne sont généralement pas optimisés pour la lecture vidéo. Bien qu’ils offrent des résolutions et des taux de rafraîchissement excellents, ils sont conçus pour permettre la lecture d’un arrière- plan blanc statique avec du texte noir.
Page 262
Pour obtenir plus d’information, allez sur le site www.gateway.com. Vous souhaitez modifier les paramètres d’affichage pour améliorer la qualité de l’image TV ou DVD Réglez la luminosité, le contraste, la teinte et la •...
Mémoire Vous voyez apparaître un message « Erreur de mémoire » Assurez-vous que le module de mémoire est • convenablement inséré dans la fente de baie de mémoire. Utilisez l’utilitaire de diagnostic de mémoire • pour aider à déterminer si un module de mémoire est défectueux.
CHAPITRE 8 : Dépannage Modem (câble ou DSL) Le modem ne se connecte pas Assurez-vous que le câble du modem est branché • dans la sortie réseau Ethernet et non dans la prise modem optionnelle. Pour connaître l’emplacement de la prise de modem, consultez «...
Page 265
Pour vérifier les propriétés de numérotation : Cliquez sur (Démarrer), puis sur Panneau Panneau de de configuration. La fenêtre configuration s’ouvre. Cliquez sur Matériel et audio. Cliquez sur Options de modems et téléphonie. Options de modems et La boîte de dialogue téléphonie...
Page 266
CHAPITRE 8 : Dépannage Essayez une autre ligne téléphonique (soit un • numéro de téléphone différent chez vous, soit une ligne téléphonique d’un autre endroit). Si vous pouvez établir la connexion sur cette ligne, appelez votre service téléphonique pour faire réparer la ligne défectueuse.
Page 267
Le modem n’est pas reconnu par votre ordinateur portable Assurez-vous que la ligne connectée au modem • fonctionne et est branchée dans le port approprié de votre ordinateur portable. Pour connaître l’emplacement de la prise modem optionnelle, consultez « Arrière » page Si le modem partage la ligne téléphonique avec...
CHAPITRE 8 : Dépannage Le modem est bruyant lorsqu’il compose un numéro et établit la connexion Lorsque le modem essaie de se connecter à un • l’établissement d’une autre modem, il commence connexion . L’établissement d’une connexion est une conversation numérique « de prise de contact »...
La souris externe fonctionne de façon irrégulière Nettoyez la souris. • Certains modèles de tapis de souris « déroutent » • les souris optiques. Essayez la souris sur une autre surface. Réseaux (câblés) Aide Pour plus d’informations sur le dépannage du réseau, cliquez sur Démarrer puis sur Aide et support.
Page 270
CHAPITRE 8 : Dépannage Votre réseau Ethernet câblé fonctionne plus lentement que prévu Si votre réseau Ethernet fonctionne plus • lentement que prévu, vérifiez la vitesse de chaque composant Ethernet. Pour des résultats optimum, tous les composants Ethernet devraient être standard, Ethernet (10 Mbit/s), Ethernet rapide (100 Mbit/s ou 10/100 Mbit/s) ou Ethernet Gigaoctet (1000 Mbit/s ou 10/100/ 1000 Mbit/s).
Mise en garde Si votre ordinateur portable était affilié à un domaine avant que vous ne vous joigniez à un groupe de travail, il est séparé du domaine et le compte de votre ordinateur est désactivé. Contactez l’administrateur de réseau ou le service informatique de votre société...
Page 272
CHAPITRE 8 : Dépannage Cliquez sur Afficher l’état de la connexion État de la réseau. La boîte de dialogue connexion réseau sans fil s’ouvre. Le compteur indique l’intensité du signal du réseau sans fil sur votre ordinateur si d’autres ordinateurs ayant un nom de réseau identique sont à...
La caractéristique de mot de passe (établie dans l’utilitaire Configuration BIOS) est très sûre. Il n’est donc pas facile de récupérer un mot de passe oublié. Vous devez renvoyer votre ordinateur portable pour réparation. Appelez le service d’assistance clientèle de Gateway pour obtenir des instructions.
CHAPITRE 8 : Dépannage Alimentation Votre ordinateur portable ne fonctionne pas sur l’alimentation c.a. Assurez-vous que l’adaptateur c.a. est bien • connecté à votre ordinateur portable. Pour des instructions sur le branchement de l’adaptateur c.a., consultez « Branchement de l’adaptateur c.a. » page Si votre ordinateur portable est branché...
Imprimante Aide Pour plus d’informations sur le dépannage de l’imprimante, cliquez sur Démarrer puis sur Aide et support. Tapez les mots clés dépannage de l’imprimante dans le champ Rechercher et appuyez ensuite sur Entrée. L’imprimante ne s’allume pas Assurez-vous que l’imprimante est sous tension.
CHAPITRE 8 : Dépannage Assurez-vous que l’imprimante n’est pas • configurée pour travailler hors connexion. Pour s’assurer que l’imprimante n’est pas configurée pour travailler hors connexion : Cliquez sur (Démarrer), puis sur Panneau Panneau de de configuration. La fenêtre configuration s’ouvre.
Assurez-vous que la commande de volume de • votre ordinateur portable est en fonction. Pour obtenir plus d’informations sur l’utilisation du multimédia, consultez « Réglage du volume » page Assurez-vous que la commande de volume • Windows est en fonction. Consultez «...
Si vous avez installé récemment des • périphériques ou des logiciels, assurez-vous d’avoir effectué l’installation conformément aux instructions fournies. Si vous n’avez pas acheté les périphériques ou logiciels chez Gateway, consultez la documentation du fabricant et les ressources du support technique.
Page 279
Le technicien peut vous demander de suivre certaines étapes de dépannage. Guide de configuration inclut le numéro de • téléphone de l’assistance client Gateway. Pour obtenir plus d’informations, consultez « Coordonnées de Gateway » page...
Page 281
ANNEXE Informations légales • Informations de sécurité importantes • Énoncés sur la conformité aux règlements • Informations d’ordre environnemental • Avis...
CSA de calibre 26 AWG ou supérieur (par exemple 24 AWG) pour le branchement de votre modem à accès commuté. Votre ordinateur portable Gateway a été conçu et testé pour satisfaire aux plus récentes normes en matière de sécurité d’équipement technologique. Cependant, pour assurer une utilisation en toute sécurité...
Page 283
Précautions lors de l’utilisation • Ne piétinez pas le cordon d’alimentation ou ne déposez rien sur celui-ci. • Ne déversez aucun liquide sur l’ordinateur. Le meilleur moyen d’éviter des déversements accidentels est de ne pas manger ou boire près de l’ordinateur.
Page 284
émettent moins d’énergie que ce qui est autorisé dans les normes et recommandations de sécurité concernant la fréquence radioélectrique, Gateway est d’avis que l’utilisation de ces appareils est sûre. Quels que soient les niveaux d’alimentation, il faut prendre soin de minimiser les contacts lors d’un fonctionnement normal.
Page 285
Les appareils sans fil ne peuvent pas être réparés par l’utilisateur. Ne les modifiez d’aucune façon. Une modification apportée à un appareil sans fil annule toute autorisation d’utilisation. Veuillez communiquer avec Gateway pour les réparations. Mise en garde L’appareil de transmission intégré dans cet ordinateur portable ne peut pas être utilisé...
Page 286
Déclaration de conformité de la FCC Mise en garde Les changements ou modifications non approuvés expressément par Gateway peuvent annuler la conformité de la FCC et annuler votre autorisation d’utiliser l’ordinateur portable. Mise en garde Recyclez ou jetez adéquatement l’ordinateur portable usagé...
Page 287
Proposition 65 de la Californie Avertissement Ce produit contient des éléments chimiques reconnus par l’État de la Californie comme pouvant causer le cancer, des anomalies congénitales et/ou un danger pour la reproduction. Pour plus d’informations concernant cet avertissement, allez à...
Page 288
Les appareils sans fil ne peuvent pas être réparés par l’utilisateur. Ne les modifiez d’aucune façon. Une modification apportée à un appareil sans fil annule toute autorisation d’utilisation. Veuillez communiquer avec Gateway pour les réparations. Mise en garde L’appareil de transmission intégré dans cet ordinateur portable ne peut pas être utilisé...
Page 289
Le fonctionnement de cet appareil est sujet aux conditions suivantes : (1) Cet appareil ne peut pas causer une interférence nuisible et (2) cet appareil doit accepter toute interférence reçue, incluant une interférence pouvant causer un fonctionnement non désiré de l’appareil.
Page 290
à ouvrir le boîtier du lecteur CD ou DVD. Tous les systèmes Gateway équipés de lecteurs CD et DVD sont conformes aux normes de sécurité appropriées, incluant la norme IEC 825. Les appareils laser de ses composants sont classés comme «...
Page 291
Dans la plupart des cas, votre produit, une fois arrivé à la fin de sa vie, peut être échangé contre un crédit applicable à l’achat d’un nouvel équipement Gateway. Appelez Gateway pour savoir si ce programme est disponible dans votre région.
Page 292
Gateway n’est pas responsable des informations inexactes qui peuvent paraître dans le manuel. Consultez le site Web de Gateway à www.gateway.com, pour connaître les plus récentes mises à jour des produits. Gateway ne peut être tenue responsable de dommages, directs, indirects, spéciaux, exemplaires, accidentels ou consécutifs résultant d’une défaillance ou d’une omission dans ce manuel, même si...
Index modes de gestion modification des modes accessoires mesures de sécurité paramètres avancés activation de l'ordinateur portable paramètres SpeedStep adaptateur c.a. problèmes de source adaptateurs prolongation de la durée de internationaux la batterie connecteur voyant connexion voyant d'état adaptateur d'alimentation anti-vol EmPower câble...
Page 294
Index contrôle de la charge installation dépannage logement durée de vie retrait état de charge carte PCMCIA gestion de l'alimentation Voir Carte Express cartes icônes cartes mémoire prises en installation charge jauges dépannage de carte localisation Express loquet dépannage de carte loquet de blocage mémoire optimisation de la...
Page 295
HDMI (TV) codes de numérotation souris combinaisons de touches télévision configuration mesures de sécurité connecting connexions sans fil à fréquence video camera radioélectrique connections conseils de voyage HDMI (TV) out Corbeille connexion suppression de fichiers adaptateur c.a.
Page 296
Gateway code régional coordonnées contrôle de la lecture support dépannage insertion Gateway Recovery Center lecture réinstallation de logiciels nettoyage orifice d'éjection réinstallation de pilotes manuelle réinstallation de programmes glissement écran dépannage résolution écran ACL...
Page 297
DVD/CD-RW installation DVD±RW par défaut DVD±RW multiformat port USB identification de types de imprimante par défaut lecteur installation types appareil photo limiteur de surtension numérique batterie logiciels caméra vidéo numérique réinstallation loquet carte Express batterie imprimante luminosité...
Page 298
Index prise (modem commuté) extérieur de l'ordinateur portable modem câble numéro de modèle connexion numéro de série dépannage modem commuté dépannage objets à l'écran diagnostics déplacement propriétés de obtenir de l'information numérotation réglage du volume sélection utilisation lors des orifice d'éjection voyages modem DSL connexion...
Page 299
Port HDMI réinstallation avec Gateway Recovery port USB Center Port VGA avec Restauration du ports système Windows Voir connexions prise de casque d'écoute logiciels prise de sortie HDMI (TV)
Page 300
Index port USB télévision lecture de DVD sur sécurité prise de sortie HDMI diminution de la fatigue visualisation de l'affichage visuelle directives de dépannage testeur de ligne entretien de votre touche d'application ordinateur touche de système ACL/CRT portable éviter la fatigue répétitive touche Fn touches installation de...
Page 301
Port VGA prise de sortie HDMI video camera connecting volume commandes dépannage mise en sourdine réglage réglage du modem voyant d'état Ethernet sans fil Voyant Verr Maj...
Need help?
Do you have a question about the TC73 and is the answer not in the manual?
Questions and answers