Epson WorkForce AL-M300 Series User Manual page 92

Temp Plain1
Temp Plain2
Temp SemiThk
Temp Labels1
Temp Thick
Temp ExtraThck
Temp Thick3
Temp Envelope
Highland
BTR Cleaning
Dev Refresh
Toner Refresh
Noise Level
Mono DiagnosisSht
*
Aavailable only for AL-M400 Series.
Plain, Preprinted, Letterhead, Recycled, Color, Special
Adjusts the print quality according to the paper type. Select 0 when a thin paper is printed.
To print using Thick3 paper (stiff, smooth on the surface, and more than 279 mm vertically), select 2
for Special in this menu, and Special from Paper Type on the printer driver. However, duplex
printing is not available with this settings, and feeding paper takes more time.
Feed Offset
Adjusts the vertical position in which to start printing. The position moves lower on the sheet as the
value increases. This setting is used when doing single-sided printing or printing the first page for
duplex printing.
Scan Offset
Adjusts the horizontal position in which to start printing. The position moves to the right of the sheet
as the value increases. This setting is used when doing single-sided printing or printing the first page
for duplex printing.
-9 ... 0 ... 9
0, 2, 4, 6
-
-
-
0 ... 3 ... 7
-
AL-M300/AL-M400 Series
Using the Control Panel
User's Guide
92