Printing A Configuration Status Sheet; Operational Problems; The Ready Light Does Not Turn On - Epson WorkForce AL-M300 Series User Manual

12. Close cover B.

Printing a Configuration Status Sheet

To confirm the current status of the printer, and that the options are installed correctly, print a
configuration status sheet using the printer's control panel or the printer driver.
To print a configuration status sheet from the printer's control panel, see "Printing a Configuration
Status Sheet" on page 109.
To print a configuration status sheet from the printer driver, for Windows, see "Printing a
configuration status sheet" on page 171.

Operational Problems

The Ready light does not turn on

Cause
The power cord may not be properly plugged into the
electrical outlet.
The electrical outlet may be controlled by an outside
switch or an automatic timer.
AL-M300/AL-M400 Series
What to do
Turn off the printer, check the power cord connections between
the printer and the electrical outlet, then turn the printer back on.
Make sure that the switch is turned on or plug another electrical
device into the outlet to check whether the outlet is operating
properly.
User's Guide
Troubleshooting 152