Table of Contents
Advertisement
Installation
8.
Replace the plate – a 'click' sound
should be heard to signify that the
plate has been correctly replaced.
Important things to consider
• In a multigang dimmer, to be able to
operate any gang, mains electricity
must always be connected to all of the
dimmer terminals.
• It is recommended that LightwaveRF devices be positioned at least 30cm
apart in order to prevent the risk of any radio conflict that could disrupt
remote operation.
• Suitable lamps must be used with the dimmer or it will not function
correctly. See next section for compatibility information.
Advertisement
Table of Contents
