Page 1
LightwaveRF connect On/O /Stop Switch Operation Manual Model No: JSJS LW826 It is important to install this product in accordance with the tting instructions below. Failure to do so may render your guarantee void. IMPORTANT: PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE AND FOR GUIDANCE ON THE ASSOCIATION OF REMOTE HANDSETS.
The On/O /Stop Switch is designed to operate the LightwaveRF Inline Relay. The ‘Stop’ function makes it particularly useful in the operation of curtains and automatic doors. SETUP: The functions illustrated here relate to the operation of the LightwaveRF Inline Relay. For information...
Page 3
Changing the Remote Battery 1. Locate one of the two small slots cut into the bottom edge of the ‘stop’ and ‘o ’ keys on the On/O /Stop Switch. 2. Using a small screwdriver, gently insert into the slot and prise o one of the keys. 3.
SPECIFICATION RF frequency: 433.92 MHz Battery: CR 2032 Battery Birmingham Science Park Aston Faraday Wharf Holt Street Birmingham B7 4BB Tel: 01902 500 562 Email: support@jsjsdesigns.com...
Page 5
Lighting Compatibility Information If you are going to use LightwaveRF equipment in your house, please read the information below to ensure you will get the most out of your hardware. Loading Our one and two gang dimmers can handle a maximum of 250W of load on each gang of the switch.