Device Setup - LightwaveRF LW400 Instruction Manual

Device setup

Linking the dimmers to the App or a remote
NOTE: This procedure also applies to other LightwaveRF controllers (e.g.
Handheld Remote or Mood Controller) which can be linked to the dimmers.
LightwaveRF dimmers each have 6 unique memory slots which means they
can link with up to 6 LightwaveRF controllers in total. If you are using a
smartphone/tablet/PC to control the dimmer via the Lightwave Link, this
will always count as ONE controller and take up one memory slot even if you
are using multiple smartphones/tablets.
1.
On the dimmer switch, press and hold
down both the 'on' and 'o ' buttons until the
blue and amber LEDs flash alternately then
release them. The dimmer switch is now in
linking mode.
2.
Using the LightwaveRF App, press the
'connect' button (the App instructions will
guide you through this). If using another
controller, press the button that you intend to
link. The blue light on the dimmer switch will
flash to confirm that the App is now linked.