Connection Between Two Memory Card Interface Units And Two Processor Units - Furuno CU-300 Operator's Manual

2.3 Connection between Two Memory Card
Interface Units and Two Processor Units
Prepare the following cables and connectors:
• Commercial LAN cable (CAT5, STP, straight)
• Cable assy, MJ-A6SPF0014-010C/050C/100C/200C/300C (option for NavNet VX2)
• Converter connector, MJA6SERMD/TM11AP8-005 (option for NavNet VX2)
POWER
F.G.
1 3
0.3 A MAX
2
GND
OUTPUT
12 VDC
NTSC/PAL
RGB OUT
OPTION
1 2 INPUT
12-24 VDC
3
GND
CARD SLOT
NavNet VX2-BB
Processor unit
NavNet VX2-BB
Processor unit
POWER
F.G.
3
0.3 A MAX
2
GND
OUTPUT
12 VDC
NTSC/PAL
RGB OUT
OPTION
1 2 INPUT
12-24 VDC
3
GND
CARD SLOT
Power cable
MJ-A3SPF0026-050C or 100C
REMOTE FMD DISPLAY
DJ-1
NETWORK CONT DATA 3 DATA 2 DATA 1
Cable assy
MJ-A6SPF0014-010C/
050C/100C/200C/300C
(Option for NavNet VX2)
REMOTE FMD DISPLAY
DJ-1
NETWORK CONT DATA 3 DATA 2 DATA 1
Power cable
MJ-A3SPF0026-050C or 100C
Ground wire
IV-1.25sq
(Local supply)
Converter connector
MJA6SRMD/TM11AP8-005
(Option for NavNet VX2)
HUB
Converter connector
MJA6SRMD/TM11AP8-005
(Option for NavNet VX2)
7
Ground
LAN cable
(CAT5, STP, straight,
local supply)
LAN cable
(CAT5, local supply)
Ground
Ground wire
IV-1.25sq
(Local supply)