System Configurations - Furuno CU-300 Operator's Manual

SYSTEM CONFIGURATIONS

The Memory Card Interface Unit CU-300 connects to a processor unit of MODEL18x4C-BB/
19x4C-BB or GD-1920C-BB (NavNet VX2-BB) to provide a card drive(s) in a remote location(s).
Power to the CU-300 is supplied from the processor unit. Maximum four units can be connected
via a HUB. Note that the CU-300 can be connected only to the NavNet VX2 units which have the
following software version No.
MODEL 18x4C-BB/19x4C-BB, GD-1920C-BB
MODEL 18x4C/19x4C, GD-1920C
MODEL 17x4C, GD-1720C
MODEL 18x4C-BB/19x4C-BB, GD-1920C-BB
MODEL 18x4C/19x4C, GD-1920C
MODEL 17x4C, GD-1720C
C-MAP specification
Type
NAVIONICS specification
Type
Version No.
1950026-02.01 and after
1950024-02.01 and after
1950028-02.01 and after
Version No.
1950025-01.09 and after
1950023-01.09 and after
1950027-01.09 and after
iv