Table of Contents
Advertisement
4)
If your ADSL lease is in "pay-according-time" mode, select "Connect on Demand" or
"Connect Manually" for Internet connection mode. Type an appropriate number for "Max
Idle Time" to avoid wasting paid time. Otherwise, you can select "Auto-connecting" for
Internet connection mode.
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time to Max Idle
Time, since some applications is visiting the Internet continually in the background.
2)
If you are a Cable user, please configure the router following the above steps.
2.
How do I configure the router to access Internet by Ethernet users?
1)
Login to the router, click the "Network" menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select "Dynamic IP" for "WAN Connection Type", finish by
clicking "Save".
2)
Some ISPs require that you register the MAC Address of your adapter, which is
connected to your cable/DSL Modem during installation. If your ISP requires MAC
register, login to the router and click the "Network" menu link on the left of your browser,
and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC's MAC
address is proper MAC address, click the "Clone MAC Address" button and your PC's
MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address
into the "WAN MAC Address" field. The format for the MAC Address is
XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting.
MR4-WR642G
Figure A-2 PPPoE Connection Mode
Figure A-3 MAC Clone
67
108M Wireless Router User Guide
Advertisement
Table of Contents
