TP-Link MR4-WR642G User Manual page 73

3. I want to use Netmeeting, what do I need to do?
1) If you start Netmeeting as a sponsor, you don't need to do anything with the router.
2) If you start as a response, you need to configure Virtual Server or DMZ Host.
3) How to configure Virtual Server: Login to the router, click the "Forwarding" menu on the
left of your browser, and click "Virtual Servers" submenu. On the "Virtual Server" page,
click Add New, then on the "Add or Modify a Virtual Server" page, enter "1720" into the
blank behind the "Service Port", and your IP address behind the IP Address, assuming
192.168.1.169 for an example, remember to "Enable" and "Save".
Note:
Your opposite side should call your WAN IP, which is displayed on the "Status" page.
4) How to enable DMZ Host: Login to the router, click the "Forwarding" menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click "Enable" radio and
type your IP address into the "DMZ Host IP Address" field, using 192.168.1.169 as an
example, remember to click the "Save" button.
MR4-WR642G
Figure A-4 Virtual Servers
Figure A-5 Add or Modify a Virtual server Entry
Figure A-6 DMZ
108M Wireless Router User Guide
68