Backup & Restore; Reboot - TP-Link Archer C20 User Manual

Chapter 6
• The default Username: admin
• The default Password: admin
• The default
• The default
6. 8. 6. Backup & Restore
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file in your computer for future use and restore the router to
the previous settings from the backup file when needed.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
To backup configuration settings:
Click Backup to save a copy of the current settings in your local computer. A ".bin" file
of the current settings will be stored in your computer.
To restore configuration settings:
1. Click Choose File
click Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
6. 8. 7.

Reboot

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
IP Address: 192.168.0.1
Subnet Mask: 255.255.255.0
> Backup & Restore.
to locate the backup configuration file stored in your computer, and
> Reboot, and you can restart your router.
Configure the Router in Range Extender Mode
107