Led Control - TP-Link Archer C20 User Manual

Chapter 5
3. Enter the Time in Hour/Minute/Second format.
4. Click Save.
To set time automatically:
5. Select your local
6. Enter the address or domain of the
7. Click Get GMT to get time from the internet if you have connected to the internet.
To set Daylight Saving Time:
1. Select Enable DaylightSaving.
2. Select the start time from the drop-down list in the
3. Select the end time from the drop-down list in the
4. Click Save.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log
in to the router successfully; otherwise, time-based functions will not take effect.
5. 9. 2.

LED Control

The LED Control allows you to turn on or off the LEDs on your device according to a
specific time schedule.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
time zone.
NTP Server I
> LED Control.
or NTP Server II.
Start field.
End field.
85