Dhcp; Dhcp Settings - TP-Link Archer C20 User Manual

Chapter 5
6. Select Schedule
guest network.
7. Click Save.
• Guest Network Isolation
5. 8.

DHCP

By default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the
router acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices
from the IP Address Pool. You can change the settings of DHCP Server if necessary,
and you can reserve LAN IP addresses for specified client devices.
5. 8. 1.

DHCP Settings

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to DHCP > DHCP
3. Specify DHCP server settings and click Save.
from the Access Time
- If enabled, guests are isolated from each other.
Settings.
drop-down list and customize it for the
81