TP-Link Archer C20 User Manual page 64
Ac750 wireless dual band router
Hide thumbs
Also See for Archer C20:
- User manual (144 pages) ,
- Quick installation manual (2 pages) ,
- Quick installation manual (2 pages)
Table of Contents
Advertisement
Chapter 4
•
WAN Connection
4. Click Save.
4. 17. 3. IPv6 LAN
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
IPv6
>
IPv6
3. Select the
Address Autoconfiguration Type
router assigns IPv6 address for PCs on the LAN:
•
Address Autoconfiguration Type
DHCPv6 (Dynamic Host Configuration Protocol for IPv6) Server.
•
Site Prefix Configuration Type
•
Delegated
device will delegate it to the LAN.
•
Static
contact your ISP to get more information before you configure them.
Tips: If your IPv6 wan connection type is "Tunnel 6to4", the Site Prefix Configuration Type should be "Static" to
make sure "Tunnel 6to4" works properly.
4. Click Save.
- Display the available WAN connection.
LAN.
- Get the IPv6 address prefix from the ISP automatically, and the
- Configure the
Site Prefix
which determines the way how the
- RADAD (Router Advertisement Daemon) and
- The type of IPv6 address prefix.
and
Site Prefix Length
manually. Please
59
Advertisement
Table of Contents
