TP-Link Archer C20 User Manual page 22

Chapter 4
• Gateway - Enter the gateway IP address in dotted-decimal notation provided by your
ISP.
• Primary/Secondary DNS Server
notation provided by your ISP. For the Secondary DSN Server, it is optional.
• MTU (Bytes) - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
• PPP Username/Password
These fields are case-sensitive.
• Confirm Password
password you entered is correct.
• Secondary Connection
an extra connection type, select
connection.
• Connection Mode
• Always On - In this mode, the internet connection will be active all the time.
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again. If you want to keep
your internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your internet access disconnects.
• Connect Manually
immediately. This mode also supports the
on Demand
- Enter one or two DNS addresses in dotted-decimal
- Enter the user name and password provided by your ISP.
- Enter the Password provided by your ISP again to ensure the
- It's available only for PPPoE connection. If your ISP provides
Dynamic IP
- In this mode, the internet connection can be terminated
- You can click
mode. The internet connection can be disconnected automatically
or Static IP to activate the secondary
Connect/Disconnect
Max Idle Time
Max Idle Time
to connect/disconnect
function as Connect
17