Operation Instruction - Samsung DW60M5060FS User Manual

Operation instruction

Control panel
DW60M5060FS/DW60M5060FW
1 3
1
2 Program
3 Half load
4 Delay start
5 Display
6 Rinse Add
7 Hygiene
Multi tab
8
(Control lock)
9
• When the door is open only the
• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before
starting a cycle.
DW4000KM-00000A-00_EN (Basic)_160323.indd
2
4
Press this button to turn on your dishwasher : the screen lights up.
To select washing program press this button.
To select Half load function. With this Half load function you can only use it
to wash either basket, and you will see less water and energy consumption.
It can only be used with all program expect Pre Wash．
Press this button to set the delayed hours for washing. You can delay the
start of washing up to 24 hours. One press on this button delays the start of
washing by one hours.
Running indicator, delay time, information codes and etc.
To select Rinse Add function, you can use it when you want to add once
rinse after the program. It can be used with all program expect Pre Wash.
Push the Hygiene button for the best possible hygiene in your dishwasher.
At the final rinse it heat up to 70 °C and hold this temperature for a several
minutes. This function is available with all program except Pre Wash.
To select Multi in 1 option which needs salt and rinse aid but a Multi in 1
tablet. This option can be used with other programme ( Intensive、Eco ）
Another option allows you to lock the buttons on the control panel so
children cannot accidentally start the dishwasher by pressing the buttons
on the panel. To lock and unlock the buttons on the control panel, hold down
the Multi in 1 button for 3 seconds.
In power on condition, close the dishwasher door and select the cycle and
desired options. Press the
When you want to pause the dishwasher while running, press the
button and make sure to open the door slowly and carefully.
You can reset the machine by pressing the
during washing. After reset, the dishwasher goes to the initial state except salt
consumption setting of water softener.
button will operate.
7
5 8
button to begin the cycle.
button for 3 seconds
Operation Instruction _7
6
7 9