Table of Contents
Advertisement
Operation instruction
Control panel
DW60M5030FS/DW60M5030FW
1
1
2
Program
3
Half load
4
Hygiene
Multi tab
5
(Control lock)
6
•
When the door is open only the
•
You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before
starting a cycle.
DW4000KM-00000A-00_EN (Basic)_160323.indd
2
3
Press this button to turn on your dishwasher : the screen lights up.
To select washing program press this button.
To select Half load function. With this Half load function you can only use it
to wash either basket, and you will see less water and energy consumption.
It can only be used with all program except Pre Wash．
Push the Hygiene button for the best possible hygiene in your dishwasher.
At the final rinse it heat up to 70 °C and hold this temperature for a several
minutes. This function is available with all program except Pre Wash.
To select Multi in 1 option which needs salt and rinse aid but a Multi in 1
tablet. This option can be used with other programme ( Intensive, Eco and
normal ). Another option allows you to lock the buttons on the control panel
so children cannot accidentally start the dishwasher by pressing the buttons
on the panel. To lock and unlock the buttons on the control panel, hold down
the
Multi in 1
button for (3) seconds.
In power on condition, close the dishwasher door and select the cycle and
desired options. Press the
When you want to pause the dishwasher while running, press the
button and make sure to open the door slowly and carefully.
You can reset the machine by pressing the
during washing. After reset, the dishwasher goes to the initial state except salt
consumption setting of water softener.
button will operate.
7
4
5
button to begin the cycle.
button for 3 seconds
Operation Instruction _9
6
Advertisement
Table of Contents
