Samsung DW60M5060FS User Manual page 14

3 OPTION ICONS
Rinse Add
（DW60M5060FS）
（DW60M5060FW）
Hygiene
Multi tab
(Control lock)
4 INDICATORS
SALT REFILL
INDICATOR
RINSE REFILL
INDICATOR
CONTROL LOCK
INDICATOR
DELAY START
INDICATOR
14_ Operation Instruction
DW4000KM-00000A-00_EN (Basic)_160323.indd
When pressing the option icons, the corresponding option function
is selected.
To select Rinse Add function, you can use it when you want to add
once rinse after the program. It can be used with all program expect
Pre Wash.
Push the Hygiene button for the best possible hygiene in your
dishwasher. At the final rinse it heat up to 70 °C and hold this
temperature for a several minutes. This function is available with all
program except Pre Wash.
To select Multi in 1 option which needs salt and rinse aid but a Multi in 1
tablet. This option can be used with other programme ( Intensive, Eco
and normal ). Another option allows you to lock the buttons on the
control panel so children cannot accidentally start the dishwasher by
pressing the buttons on the panel. To lock and unlock the buttons on
the control panel, hold down both the Multi in 1 button for (3) seconds.
When the indicator is on, it reminds of that client has chosen delay
function, client need to add salt and etc.
If the "Salt Refill" indicator is lit, it means the dishwasher is low on
dishwasher salt and needs to be refilled.
If the "Rinse Refill" indicator is lit, it means the dishwasher is low on
dishwasher rinse aid and requires a refill.
If the "Control lock" indicator id fit, it means the dishwasher is locked,
you cannot do any operate.
If the "Delay Start" indicator is fit, it means the dishwasher start will
delay several hours which you setup.
12