Operation Instruction - Samsung DW50K4050BB User Manual

Operation instruction

Control panel
DW50K4030FS/FW
1 3
1 POWER
2 Program
3 Half load
4 Delay start
5 Display
6 Rinse Add
7 Hygiene
Multi tab
8
(Control lock)
9 START (Reset)
• When the door is open only the POWER button will operate.
• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before
starting a cycle.
DW4000KM-00000A-00_EN (Basic)_160323.indd 7 DW4000KM-00000A-00_EN (Basic)_160323.indd 7
2
4
Press this button to turn on your dishwasher : the screen lights up.
To select washing program press this button.
To select Half load function. (With this Half load function you can only use it
when you have only about or less than 5 place setting dishware, and you will
see less water and energy consumption. It can only be used with all program
except Pre Wash.)
Press this button to set the delayed hours for washing. You can delay the
start of washing up to 24 hours. One press on this button delays the start of
washing by one hours.
Running indicator, delay time, error codes and etc.
To select Rinse Add function, you can use it when you want to add once
rinse after the program. It can be used with all program expect Pre Wash.
Push the Hygiene button for the best possible hygiene in your dishwasher.
At the final rinse it heat up to 67 °C and hold this temperature for a several
minutes. This function is available with all program except Pre Wash.
To select Multi in 1 option which needs salt and rinse aid but a Multi in 1
tablet. This option can be used with all program except Pre Wash. Another
option allows you to lock the buttons on the control panel so children cannot
accidentally start the dishwasher by pressing the buttons on the panel. To
lock and unlock the buttons on the control panel, hold down both the Multi in 1
button for (3) seconds.
In power on condition, close the dishwasher door and select the cycle and
desired options. Press the START button to begin the cycle.
When you want to pause the dishwasher while running, press the START
button and make sure to open the door slowly and carefully.
You can reset the machine by pressing the START button for 3 seconds
during washing. After reset, the dishwasher goes to the initial state except salt
consumption setting of water softener.
5 8
Operation Instruction _7
6
7 9
2016-03-23 2016-03-23 1:14:27 1:14:27