Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerWalker BP A36RM-6x9Ah
Summary of Contents for PowerWalker BP A36RM-6x9Ah
- Page 1 User Manual Battery Pack...
- Page 2 1. Important Safety Warnings Please comply with all warnings and operating instructions in this instruction strictly. Read carefully the following instructions before installing the unit. Do not operate this unit before reading through all safety information and operating instructions carefully. Do not try to assemble or repair the unit yourself, contact your local ...
- Page 3 CAUTION – A battery can present a risk of electrical shock and high short circuit current. The following precaution should be observed when working on batteries: 1. Remove watches, rings, or other metal objects. 2. Use tools with insulated handles. 3.
- Page 4 SOP - How to assemble BP A36R-6x9Ah 1.As shown above：unscrew all screws on the battery isolation pad for separation. Screw P/N：38-000008-00G*6 Torque：8KG. 2.As shown left：take out the plastic isolation tray for later assembly(44-040053-XXG) 3．As shown left: get 3 batteries and a False battery serial connection 26-000003-XXG/45W、12V、9AH)
- Page 5 1.As shown left：take out the plastic isolation tray for later assembly(44-040053-XXG) 2．As shown left: get 3 batteries and a False battery serial connection 26-000003-XXG/45W、12V、9AH) Please be noticed about the rubber protection on the red wire. Warning Stick 3. As shown left: Put on the warning stick ( onto the 37-000031-XXG)
- Page 6 1.As shown both of two：Push the assembled battery bank into the case following the instructed direction (the red arrow) 2.As shown bellow： screw the processed battery isolation pad onto the case M3*6 round-cross screw 38-000008-XXG*6， Torque：8KGF-CM。 3. Check with no missed isolation sticks on the 4 battery terminals ( 44-040046-XXG) Isolation sticks...
Need help?
Do you have a question about the BP A36RM-6x9Ah and is the answer not in the manual?
Questions and answers