Subscribe to Our Youtube Channel
Related Manuals for PowerWalker BP I2 120T-40 9Ah Series
Summary of Contents for PowerWalker BP I2 120T-40 9Ah Series
- Page 1 BATTERY INSTALLATION External Battery Module PowerWalker BP I2x120T-40x9Ah Battery Installation Guide...
- Page 2 BATTERY INSTALLATION 1. Instructions Safety Instructions Installation or battery replacement must be performed by professional technical personnel. CAUTION: To reduce the risk of fire, replace with the same number and type of battery. CAUTION: Risk of electric shock, Battery circuit is not isolated from AC input, hazardous voltage may exist between battery terminals and ground.
- Page 3 BATTERY INSTALLATION 2. Battery Installation 2.1). Take out the side cover by removing screws on top & bottom according to Fig 2-1: Fig 2-1 2.2). Remove the screws and the battery keep part for one side refer to Fig 2-2: Fig 2-2 2.3).
- Page 4 BATTERY INSTALLATION Fig 2-3 2.4). Connect the battery wires: A). Connect the black battery wire11(L=250mm) *2pcs of top 4 battery according to Fig 2-4: Fig 2-4 B). Connect the black battery wire12&13*1pcs of rear panel to the negative, and connect the red battery wire14&15&16&17*1pcs of rear panel to the positive, according to Fig 2-5: Fig 2-5 C).
- Page 5 BATTERY INSTALLATION Fig 2-6 D). On the other side, first connect the single black wire21(L=580mm) *1pcs, then the black wire19(L=550mm) *3pcs, last the black ipsilateral jumper wire20(L=70mm) *14pcs, according to Fig 2-7: Fig 2-7 2.5). Install the right and left covers according to below Fig 2-8: Fig 2-8...
-
Page 6: Internal Wiring Diagram
Wire Specification Wire Length mm 10 AWG BLK 10 AWG BLK 10 AWG BLK 10 AWG RED 10 AWG RED PowerWalker BP 10 AWG RED I2x120T-40x9Ah 10 AWG RED 10 AWG BLK 10 AWG BLK 10 AWG BLK 10 AWG BLK... -
Page 7: Specification
Battery configuration Battery Configuration Model Voltage Nominal Battery Total Q'ty Type PowerWalker BPH I2x120T-40 (without Bat) 240V 12V 9AH PowerWalker BP I2x120T-40x9Ah (with Bat) 240V 12V 9AH Double battery, 2srting (Including +BAT & -BAT), Only for 10K 3-3 Dimensions and weights...
Need help?
Do you have a question about the BP I2 120T-40 9Ah Series and is the answer not in the manual?
Questions and answers