Advertisement
Advertisement
Table of Contents
Related Manuals for PowerWalker BP A36T-6x9Ah
Summary of Contents for PowerWalker BP A36T-6x9Ah
- Page 1 User Manual Battery Pack...
- Page 2 1. Important Safety Warnings Please comply with all warnings and operating instructions in this instruction strictly. Read carefully the following instructions before installing the unit. Do not operate this unit before reading through all safety information and operating instructions carefully. Do not try to assemble or repair the unit yourself, contact your local ...
- Page 3 CAUTION – A battery can present a risk of electrical shock and high short circuit current. The following precaution should be observed when working on batteries: 1. Remove watches, rings, or other metal objects. 2. Use tools with insulated handles. 3.
- Page 4 SOP – How to assemble Battery Pack with 6 batteries (BP A36T-6x9Ah) 1.As shown, please use three batteries (12V/7Ah or Tubes 12V/9Ah） and check the date code (it’s necessary 280mm to use batteries with same date code in a UPS unit).
- Page 5 5.As shown, please use three batteries (12V/7Ah or Tubes 12V/9Ah） and check the date code (it’s necessary to 280mm use batteries with same date code in a UPS unit). 450mm Serial connect batteries with three black wires in 450, 280, 150 mm length. Slip the end of black wire with 280mm length into the tube.
Need help?
Do you have a question about the BP A36T-6x9Ah and is the answer not in the manual?
Questions and answers