Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerWalker BP A48R-8x9Ah
Summary of Contents for PowerWalker BP A48R-8x9Ah
- Page 1 User Manual Battery Pack...
- Page 2 1. Important Safety Warnings Please comply with all warnings and operating instructions in this instruction strictly. Read carefully the following instructions before installing the unit. Do not operate this unit before reading through all safety information and operating instructions carefully. Do not try to assemble or repair the unit yourself, contact your local ...
- Page 3 CAUTION – A battery can present a risk of electrical shock and high short circuit current. The following precaution should be observed when working on batteries: 1. Remove watches, rings, or other metal objects. 2. Use tools with insulated handles. 3.
- Page 4 SOP - How to assemble BP A48R-8x9Ah 1.As shown above：unscrew all screws on the battery isolation pad for separation. Screw P/N：38-000008-00G*6 Torque：8KG. 2.As shown left：take out the plastic isolation tray for later assembly(44-040053-XXG) 3．As shown left: get 4 batteries in serial connection 26-000003-XXG/45W、12V、9AH)
- Page 5 1.As shown left: get the batteries stuck onto the double-side tap on the previous isolation tray 2. As shown left: Put on the warning Warning Stick stick ( onto the 37-000031-XXG) battery (text facing up) Tool： Notice： Pliers 1. Check with correct battery spec. 2．No short between positive and negative polar of batteries 3．No reverse connection is allowed.
- Page 6 1.As shown left：take out the plastic isolation tray for later assembly(44-040053-XXG) 2．As shown left: get 4 batteries in serial connection 26-000003-XXG/45W、12V、9AH) Please be noticed about the rubber protection on the red wire. 2.As shown left: get the batteries stuck onto the double-side tap on the previous isolation tray 4.
- Page 7 1.As shown both of two：Push the assembled battery bank into the case following the instructed direction (the red arrow) 2.As shown bellow： screw the processed battery isolation pad onto the case M3*6 round-cross screw 38-000008-XXG*6， Torque：8KGF-CM。 3. Check with no missed isolation sticks on the 4 battery terminals ( 44-040046-XXG) Isolation sticks...
Need help?
Do you have a question about the BP A48R-8x9Ah and is the answer not in the manual?
Questions and answers