Page 2
BATTERY INSTALLATION 1. Instructions Safety Instructions Installation or battery replacement must be performed by professional technical personnel. CAUTION: To reduce the risk of fire, replace with the same number and type of battery. CAUTION: Risk of electric shock, Battery circuit is not isolated from AC input, hazardous voltage may exist between battery terminals and ground.
BATTERY INSTALLATION 2. Battery Installation 2.1). Take out the front panel, take out the top cover by removing screws on top & rear &side according to Fig 2-1: Fig 2-1 2.2). Put the battery into the chassis refer to Fig 2-2: Fig 2-2...
Page 4
BATTERY INSTALLATION 2.3). Connect the black battery wire11&12&13*2pcs refer to Fig 2-3: Fig 2-3 2.4). Connect the black battery wire14*4pcs and wire15*8pcs refer to Fig 2-4: Fig 2-4...
Page 5
BATTERY INSTALLATION 2.5). Install the plastic battery cover*2pcs (double-sided adhesive is glued to the inner surface of the blister), connect the red battery wire16*2pcs and the black battery wire17*2pcs, then fix the two red line with a nylon self-adhesive tie mount refer to Fig 2-5: Fig 2-5 2.6).
SPECIFICATION 4. Specification Battery configuration Battery Configuration Model Voltage Nominal Battery Type Total Q'ty PowerWalker BPH I2x120R-20 240V 12V 9AH PowerWalker BP I2x120R-20x9Ah 240V 12V 9AH Double battery, 1srting (Including +BAT & -BAT), Only for 10K 3-3 Dimensions and weights...
Need help?
Do you have a question about the BPH I2x120R-20 and is the answer not in the manual?
Questions and answers