Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PowerWalker BP A72R-12x9Ah
Summary of Contents for PowerWalker BP A72R-12x9Ah
- Page 1 User Manual Battery Pack...
- Page 2 1. Important Safety Warnings Please comply with all warnings and operating instructions in this instruction strictly. Read carefully the following instructions before installing the unit. Do not operate this unit before reading through all safety information and operating instructions carefully. Do not try to assemble or repair the unit yourself, contact your local ...
- Page 3 CAUTION – A battery can present a risk of electrical shock and high short circuit current. The following precaution should be observed when working on batteries: 1. Remove watches, rings, or other metal objects. 2. Use tools with insulated handles. 3.
- Page 4 SOP - How to assemble BP A72R-12x9Ah 1.As shown above：unscrew all screws on the battery isolation pad for separation. Screw P/N：38-000008-00G*6 Torque：8KG. 2.As shown left：take out the plastic isolation tray for later assembly(44-040045-XXG) 3． As shown left: get six batteries in serial connection 26-000003-XXG/45W、12V、9AH)
- Page 5 1.As shown left: get the batteries stuck onto the double-side tap on the previous isolation tray Warning Stick 2. As shown left: Put on the warning stick ( onto the 37-000031-XXG) battery (text facing up) Tool： Notice: Pliers 1．No short for battery is allowed. 2．Wires should be connected precisely.
- Page 6 1.As shown left：Push the assembled battery bank into the case following the Push battery set following the direction as left instructed direction (the red arrow) 2. As shown left: get another plastic tray ( 44-040045-XXG) for the assembly 3．As shown left: get six batteries in serial connection 26-000003-XXG/45W、12V、...
- Page 7 2.As shown left: get the batteries stuck onto the double-side tap on the previous isolation tray (Notice: Tenon on the plastic tray must be stuck firmly.) Warning Stick 2. Labeling: Put on the warning stick onto the battery (text facing up) Tool：...
- Page 8 1.As shown left：Push the assembled battery bank into the case following the instructed direction (the red arrow) 2.As shown bellow： screw the processed battery isolation pad onto the case M3*6 round-cross screw 38-000008-XXG*6， Torque：8KGF-CM。 3. Check with no missed isolation sticks on the 4 battery terminals ( 44-040046-XXG) Isolation sticks...
Need help?
Do you have a question about the BP A72R-12x9Ah and is the answer not in the manual?
Questions and answers