Table of Contents
Advertisement
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes. You may choose one of
these modes that best fits your operating environment and input signal picture type.
To select an operation mode that suits your need, please follow the steps described
below.
● Press [Color Mode] repeatedly until you arrive at the mode you desire.
● Enter Image > Color mode menu and press / to select the required mode.
Picture modes for different types of signals
The following lists the Picture modes that can be used for different signal types.
1.
Standard mode: Suitable for normal conditions during the daytime environment.
2.
Photo mode: Suitable for viewing photo mode.
3.
Movie Mode: Applicable for playing colored movies, video clips from digital cameras,
or DVs from a PC input in darker (dim) environments to achieve the best viewing
effects.
4.
Brightest: Maximizes the brightness of the projected image. This mode is suitable
when using projectors in environments such as well-lit rooms where extra-high
brightness is required.
5.
Presentation mode: Used during daytime presentations to match PC and laptop tint.
6.
Gaming mode: Tint suitable for the game environment.
7.
Sports mode: Tint suitable for watching sporting events.
Different models support different image modes.
PA501S/PA502S/PA502X support standards/photo/movie/brightest/presentation mode.
PX702HD supports standards/gaming/movie/brightest/motion mode.
Using Screen Color
When the projection surface is colored (such as walls that are painted in colors other
than white), the Screen Color function can be used to calibrate the color of the
projected mi age in order to prevent color offsets between the source and color of the
projected image.
To use this function, go to Display > Screen Color menu, and press / to select
the color that is closest to that of the projection surface. Several preset color options
are available, namely: white board, green board and blackboard. These setup
functions may differ according to model type.
This function is only available when PC input signals were selected.
29
Advertisement
Table of Contents
