Table of Contents
Advertisement
16:9
16:10
Panorama
2.35:1
Anamorphic
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press Color Mode to display the selection bar and press
or press Color Mode repeatedly.
•
Go to the IMAGE > Color Mode menu and press Enter. Press
desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Brightest mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2.
Dynamic mode: Is designed for presentations under daylight environment to match
PC and notebook coloring. In addition, the projector will optimize the image quality
using the dynamic PC function in accordance with the projected contents.
3.
Standard mode: Is designed for presentations under daylight environment to match
PC and notebook coloring.
4.
ViewMatch sRGB mode: Switches between high brightness performance and
accurate color performance.
5.
Movie mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
6.
DICOM SIM mode: Recommended for DICOM format files in simulation mode.
Not
Not available
available
Not
available
Not
available
33
Not available
/
to select a desired mode
/
to select a
Advertisement
Table of Contents
