ViewSonic PA700WC User Manual
  1. Manuals
  2. Brands
  3. ViewSonic Manuals
  4. Projector
  5. PA700WC
  6. User manual
ViewSonic PA700WC User Manual

ViewSonic PA700WC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PA700SC_PA700XC_PA700WC_
PS502XC_PS502WC
DLP Projector
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
Model No. VS19341 | VS19343 | VS19342 | VS19344 | VS19345
P/N: PA700SC | PA700XC | PA700WC | PS502XC | PS502WC

Advertisement

Table of Contents
loading

Related Manuals for ViewSonic PA700WC

Summary of Contents for ViewSonic PA700WC

  • Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.
  • Page 2 At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.

  • Page 3: Safety Precautions

    Safety Precautions following Safety Precautions before you start using the projector. Please read the • Keep this user guide in a safe place for later reference. • Read all warnings and follow all instructions. • Allow at least 20“ (50 cm) clearance around the projector to ensure proper ventilation.
  • Page 4 (UPS). • If smoke, an abnormal noise, or a strange odor is present, immediately switch the projector off and call your dealer or ViewSonic®. It is dangerous to continue using the projector. • Use only attachments/accessories specified by the manufacturer.
  • Page 5 Safety Precautions - Ceiling Mounting Please read the following Safety Precautions before you start using the projector. If you intend to mount the projector on the ceiling, it is strongly recommended that you use a proper fitting projector ceiling mount kit and that you ensure it is securely and safely installed.

  • Page 6: Table Of Contents

    Contents Safety Precautions ............3 Introduction ..............9 Package Contents - PA700SC | PA700XC | PA700WC ..........9 Package Contents - PS502XC | PS502WC .............10 Product Overview ....................11 Projector ........................ 11 Keypad ........................12 Indicator Lights ...................... 13 I/O Ports ........................ 14 Remote Control .....................
  • Page 7 Operating the Projector ..........43 On-Screen Display (OSD) Menu ...............43 Menu Navigation ....................44 On-Screen Display (OSD) Menu Tree ..............45 Menu Operation ....................50 Image Menu ......................50 Display Menu......................52 Setup Menu ......................55 Options Menu ....................... 57 Appendix ..............60 Specifications - PA700 ..................60 Specifications - PS502 ...................61 Projector Dimensions ...................62...
  • Page 8 Regulatory and Service Information ......70 Compliance Information ..................70 FCC Compliance Statement ................... 70 Industry Canada Statement ................... 70 CE Conformity for European Countries ..............71 Declaration of RoHS2 Compliance................. 72 Indian Restriction of Hazardous Substances ............73 Product Disposal at End of Product Life ..............73 Copyright Information ..................74 Customer Service ....................

  • Page 9: Introduction

    Introduction Package Contents - PA700SC | PA700XC | PA700WC PA700W Series DLP Projector Quick Start Guide クイックスタートガイド http://vsweb.us Download Link http://vsweb.us/q/dn.php ViewSonic Projector Number Description Projector Remote Control Batteries Quick Start Guide Power Cord VGA Cable NOTE:  The power cord and remote control included in your package may vary depending on your country.

  • Page 10: Package Contents - Ps502Xc | Ps502Wc

    Package Contents - PS502XC | PS502WC PS502W Series DLP Projector Quick Start Guide クイックスタートガイド http://vsweb.us Download Link http://vsweb.us/q/dn.php ViewSonic Projector Number Description Projector Remote Control Batteries Quick Start Guide Power Cord VGA Cable NOTE:  The power cord and remote control included in your package may vary depending on your country.

  • Page 11: Product Overview

    Product Overview Projector PA700 Series PS502 Series Number Description Vent (outlet) IR Receiver Keypad Focus Ring Vent (inlet) Projection Lens Adjuster Foot Zoom Ring I/O Ports AC IN Security Lock NOTE:  Do not block projector intake and exhaust vents.

  • Page 12: Keypad

    Keypad SOURCE ENTER AUTO MENU EXIT Description OURCE ENTER AUTO Toggles the projector between standby mode and Power Power On. Manually corrects distorted images resulting from an MENU Keystone angled projection when the On-Screen Display (OSD) EXIT Menu is activated. SOURCE ENTER AUTO...

  • Page 13: Indicator Lights

    Indicator Lights Indicator Light Description Power indicator light Light source indicator light Temperature indicator light SOURCE ENTER AUTO MENU SOURCE ENTER AUTO EXIT MENU SOURCE ENTER AUTO EXIT MENU EXIT...

  • Page 14: I/O Ports

    I/O Ports HDMI 2 HDMI 1 COMPUTER AUDIO USB 5V/1.5A (SERVICE) MONITOR OUT RS232 Port Description HDMI 1 HDMI port. HDMI 2 HDMI port. RS-232 RS-232 control port. USB (5V/1.5A Out) USB Type A port for power and service. (Service) COMPUTER RGB (PC) signal input socket.

  • Page 15: Remote Control

    Remote Control Button Description AV Mute Hide and recover the screen picture and volume mute. Power Turns the projector On or Off Automatically synchronize the projector to the input Auto Sync source. Source Toggle to the next input source. Navigates and selects the desired menu items and Navigation make adjustments when the On-Screen Display (OSD) Buttons...
  • Page 16 Button Description Keystone Manually correct distorted images. Volume Decrease the volume level. Down Video Unsupported Button Selects Computer IN port for display. HDMI Selects the HDMI 1 or HDMI 2 input source. Aspect Displays the format selection bar. Operates your display software program (on a connected PC) which responds to page up commands (like Microsoft PowerPoint).
  • Page 17 Remote Control - Receiver Range To ensure proper function of the remote control follow the steps below: 1. The remote control must be held at an angle within 30° perpendicular to the projector’s IR remote control sensor(s). 2. The distance between the remote control and the sensor(s) should not exceed 10 m (32.8 ft.).
  • Page 18 Remote Control - Replacing the Batteries 1. Remove the battery cover from the bottom of the remote control by pressing the finger grip and sliding it across. 2. Remove any existing batteries (if necessary) and install two AAA batteries. NOTE:  Observe the battery’s polarities as indicated. 3.

  • Page 19: Initial Setup

    Initial Setup This section provides detailed instructions for the initial set up your projector. Choosing a Location - Projection Orientation Personal preference and room layout will decide the installation location. Consider the following: • Size and position of your screen. •...

  • Page 20: Projection Dimensions - Pa700Sc | Pa700Xc

    Projection Dimensions - PA700SC | PA700XC • 4:3 Image on a 4:3 Screen NOTE:  • (e) = Screen (f) = Center of Lens 4:3 Image on a 4:3 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum...
  • Page 21 • 4:3 Image on a 16:10 Screen NOTE:  • (e) = Screen (f) = Center of Lens 4:3 Image on a 16:10 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 41.13 1045 45.79 1163 15.90 2.38...

  • Page 22: Projection Dimensions - Pa700Wc

    Projection Dimensions - PA700WC • 16:10 Image on a 16:10 Screen NOTE:  • (e) = Screen (f) = Center of Lens 16:10 Image on a 16:10 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 39.20...
  • Page 23 • 16:10 Image on a 4:3 Screen NOTE:  • (e) = Screen (f) = Center of Lens 16:10 Image on a 4:3 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 36.90 41.30 1049 1.80 1524 73.92...

  • Page 24: Projection Dimensions - Ps502Xc

    Projection Dimensions - PS502XC • 4:3 Image on a 4:3 Screen NOTE:  • (e) = Screen (f) = Center of Lens 4:3 Image on a 4:3 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 1016 19.74...
  • Page 25 • 4:3 Image on a 16:10 Screen NOTE:  • (e) = Screen (f) = Center of Lens 4:3 Image on a 16:10 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 1016 17.44 17.44 21.20 3.18 1524...

  • Page 26: Projection Dimensions - Ps502Wc

    Projection Dimensions - PS502WC • 16:10 Image on a 16:10 Screen NOTE:  • (e) = Screen (f) = Center of Lens 16:10 Image on a 16:10 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 1016 17.67...
  • Page 27 • 16:10 Image on a 4:3 Screen NOTE:  • (e) = Screen (f) = Center of Lens 16:10 Image on a 4:3 Screen (b) Projection Distance (c) Image (d) Vertical (a) Screen Size Height Offset Minimum Maximum 1016 16.67 16.67 2.48 1524 25.01...

  • Page 28: Mounting The Projector

    NOTE:  If you buy a third party mount, please use the correct screw size. Screw size can vary depending on the thickness of the mounting plate. 1. To ensure the most secure installation, please use a ViewSonic® wall or ceiling mount.

  • Page 29: Making Connections

    Making Connections Connecting to Power 1. Connect the power cord to the AC IN jack at the rear of the projector. 2. Plug the power cord into a power outlet. NOTE:  When installing the projector, incorporate a readily accessible disconnect device in the fixed wiring, or connect the power plug to an easily accessible outlet near the unit.

  • Page 30: Connecting To External Devices

    Connecting to External Devices HDMI Connection Connect one end of an HDMI cable to the HDMI port of your video device. Then connect the other end of the cable to the HDMI 1/2 port of your projector. NOTE:  iPhone/iPad users will need to use an additional adapter. HDMI 1 HDMI 2 USB 5V/1.5A...

  • Page 31: Audio Connection

    Audio Connection You can connect to various external sound delivery devices via the AUDIO OUT port. AUDIO Additionally, you can connect to the AUDIO IN port with your device to use the projector’s audio output. AUDIO...

  • Page 32: Usb Type A Connection

    USB Type A Connection The USB port is for: Service and HDMI devices. HDMI 2 USB 5V/1.5A NOTE:  • PA700SC/PA700XC/PA700WC/PS502XC/PS502WC USB Type A supports 5V/1.5A power output for HDMI dongle charging.

  • Page 33: Rs-232 Connection

    RS-232 Connection When you use a RS-232 serial port cable to connect the projector to an external computer certain functions can be controlled remotely by the PC, including Power On/Off, Volume adjustment, Input select, and more. RS232...

  • Page 34: Pc/Notebook And Monitor Connection

    PC/Notebook and Monitor Connection Connecting a PC/Notebook Connect one end of a VGA cable to the VGA port of the PC/Notebook. Then connect the other end of the cable to the COMPUTER port of the projector. NOTE:  To use the remote mouse control function, take a USB cable and connect one end to the USB port of the computer, and the other end to the USB port on the projector.

  • Page 35: Using The Projector

    Using the Projector Starting Up the Projector EXIT 1. Ensure the projector’s power cord is properly connected to a power outlet. 2. Press the Power button on the projector or remote control to turn on the projector. NOTE:  • The Power Indicator Light will be flashing blue during startup. •...

  • Page 36: Selecting An Input Source

    Selecting an Input Source The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. AUDIO HDMI 1 HDMI 2 COMPUTER USB 5V/1.5A (SERVICE) RS232 MONITOR OUT The projector will automatically search for input sources. If multiple sources are connected, press the Source button on the projector or remote control to select the desired input.

  • Page 37: Help Menu

    Help Menu If no input source is detected, the below “Help Menu” will be displayed.
  • Page 38 If an input source is detected, the below “Help Menu” will be displayed.

  • Page 40: Adjusting The Projected Image

    Adjusting the Projected Image Adjusting the Projector’s Height and Projection Angle The projector is equipped with two (2) adjustment feet. Adjusting the feet will change the projector’s height and the vertical projection angle.

  • Page 41: Adjusting The Focus, Keystone, And Zoom

    Adjusting the Focus, Keystone, and Zoom You can improve and adjust the clarity and position of the image by adjusting the Focus Ring, Keystone Keys, or Zoom Ring PA700 Series PS502 Series ¹ PA700 series only...

  • Page 42: Shutting Down The Projector

    Shutting Down the Projector 1. Press the Power button on the projector or remote control and a “power off message” will appear. NOTE:  The projector cannot be turned off within one minute after starting. 2. Press the Power button again to confirm and shut down the projector. NOTE: ...

  • Page 43: Operating The Projector

    Operating the Projector On-Screen Display (OSD) Menu The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. Menu Description Adjust the Display Mode, Brightness, Contrast, and other Image image related settings. Display Adjust the aspect ratio, Zoom, Keystone, and 3D settings.

  • Page 44: Menu Navigation

    Menu Navigation The projector has multilingual on-screen display menus that allow for image and settings adjustment. 1. To open the On-Screen Display (OSD) Menu, press the Menu/Exit button on the projector or the remote control. 2. When the OSD is displayed, use the Navigation buttons ( ) to select any item in the main menu.

  • Page 45: On-Screen Display (Osd) Menu Tree

    On-Screen Display (OSD) Menu Tree Main Menu Sub-menu Menu Option Standard Bright Movie Display Mode Presentation Blackboard User Brightness (-/+, -50~50) Contrast (-/+, -50~50) Sharpness (-/+, 1~15) Color (-/+, -50~50) Tint (-/+, -50~50) Film Video Gamma Graphics Image Standard BrilliantColor™ (-/+, 1~10) Warm Color Temp...
  • Page 46 3D Mode DLP-Link 3D - 2D Auto Side by Side 3D Format Top and Bottom Frame Sequential 3D Sync Invert 2 For PA700SC/PA700XC/PS502XC: 4:3, 16:9, Native, Auto. For PA700WC/PS502WC: 4:3, 16:10, Native, Auto, LBX 3 For PA700SC/PA700XC/PA700WC 4 For PS502XC/PS502WC...
  • Page 47 繁體中文 簡体中文 한국어 Русский Magyar Setup Čeština ‫عربي‬ ไทย Türkçe Tiếng Việt Indonesia Front Table Front Ceiling Projection Rear Table Rear Ceiling Top-Left Top-Right Menu Location Center Bottom-Left Bottom-Right 16:10 Screen Type5 16:9 5 Screen Type selection only for PA700WC/PS502WC...
  • Page 48 Main Menu Sub-menu Menu Option Month Security Security Timer Hour Change Password Mute Setup Audio Settings Volume (-/+, 0~10) Default Audio Input AUDIO Default Advanced Logo Neutral HDMI CEC Input Source HDMI 1 HDMI 2 Source Lock High Altitude Options Information Hide Keypad Lock Grid...
  • Page 49 Main Menu Sub-menu Menu Option Black Background Color Blue Green White Direct Power On Auto Power Off (min) (-/+, 0~180) minutes Advanced Active Power Mode (Standby) Eco. Signal Power On Lamp Hour Lamp Reminder Options Bright Lamp Settings Brightness Mode Dynamic Lamp Reset Optional Filter Installed...

  • Page 50: Menu Operation

    Menu Operation Image Menu Menu Description There are several predefined display modes that you can choose from to suit your viewing preference. Mode Description Suitable for daily circumstances in a Standard daylight environment. Bright Suitable for bright, well-lit environments. Provides the best balance of detail and Movie colors for watching movies.
  • Page 51 Menu Description The higher the value, the more greenish the picture becomes. Tint The lower the value, the more reddish the picture becomes. Gamma Reflects the relationship between input source and picture brightness. BrilliantColor™ A color-processing algorithm and enhancements to enable higher brightness while providing true, more vibrant colors in picture.

  • Page 52: Display Menu

    Display Menu...
  • Page 53 Menu Description Select the aspect ratio of the projected image. Aspect Ratio Description Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV, and 4:3 aspect DVD movies, as it displays them without aspect alteration.
  • Page 54 Menu Description 3D Mode Enable or disable the 3D function. 3D-2D Select how the 3D content should appear on screen. Option Description Display the 3D signal. Display the left frame of the 3D L (Left) content. Display the right frame of the 3D R (Right) content.

  • Page 55: Setup Menu

    Setup Menu Menu Description Language Select the On-Screen Display (OSD) Menu language. Projection Select the preferred projection position. Menu Location Select the location for the On-Screen Display (OSD) Menu. Screen Type Select between a 16:10 or 16:9 aspect ratio. Security Enable or disable a password prompt before using the projector.
  • Page 56 Menu Description When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI CEC control feature in the projector’s OSD. This lets one device or multiple devices in a group power on or power off via HDMI CEC in a typical configuration.

  • Page 57: Options Menu

    Options Menu Menu Description Input Source Use this option to enable / disable input sources. The projector will only search the current input selection. Source Lock The projector will search for other signals if the current input signal is lost. When “On”...
  • Page 58 Menu Description Direct Power On Automatically power on the projector when AC power is supplied, without pressing the Power button on the projector or the remote control. Auto Power Off A countdown timer will start when there is no signal being sent to the projector.
  • Page 59 Menu Description Optional Filter Installed Select “Yes” to display warning message after a specified number of hours. Select “No” to turn off warning message. NOTE: The default setting is “No”. After installing a filter, please turn on the projector then press Menu, go to Options >...

  • Page 60: Appendix

    (W x H x D) (12.2” x 4.5” x 9.21”) Weight Physical 2.70 kg (5.95 lbs) Power 295W (Typical) Consumption < 0.5W (Standby) 1 Please use the power adapter from ViewSonic® or an authorized source only. ² The test condition follows EEI standards.

  • Page 61: Specifications - Ps502

    (W x H x D) (12.2” x 4.5” x 9.21”) Weight Physical 2.87 kg (6.32 lbs) Power 295W (Typical) Consumption < 0.5W (Standby) 3 Please use the power adapter from ViewSonic® or an authorized source only. ⁴ The test condition follows EEI standards.

  • Page 62: Projector Dimensions

    Projector Dimensions 309 mm (W) x 115 mm (H) x 234 mm (D) EXIT EXIT EXIT 309 mm 309 mm PS502 Series PS502 Series PA700 Series PA700 Series...

  • Page 63: Timing Chart

    Timing Chart Analog RGB Signal Resolution Refresh Rate (Hz) 640 x 480 60/67/72/75 SVGA 800 x 600 56/60/72/75 1024 x 768 60/70/75 1152 x 864 WXGA 1280 x 800 Quad-VGA 1280 x 960 SXGA 1280 x 1024 60/75 WXGA 1366 x 768 WXGA+ 1440 x 900 UXGA...
  • Page 64 HDMI PC Signal Resolution Refresh Rate (Hz) 640 x 480 60/67/72/75 SVGA 800 x 600 56/60/72/75 1024 x 768 60/70/75 1152 x 864 WXGA 1280 x 800 Quad-VGA 1280 x 960 SXGA 1280 x 1024 60/75 WXGA+ 1440 x 900 UXGA 1600 x 1200 WSXGA+...

  • Page 65: Hdmi 3D

    HDMI 3D Signal Resolution Refresh Rate (Hz) Frame Packing 1080p 1920 x 1080 720p 1280 x 720 50/60 Side by Side 1080i 1920 x 1080 50/60 Top and Bottom 1080p 1920 x 1080 720p 1280 x 720 50/60 NOTE:  • 1080i@25hz and 720p@50hz will run in 100 Hz; other 3D timing will run in 120 Hz.

  • Page 66: Troubleshooting

    Troubleshooting This section describes some common problems that you may experience when using the projector. Problem or Issue Possible Solutions • Ensure the power cord is properly attached to the projector and to the power outlet. • If the cooling process has not completed, please The projector does not wait until it has finished then try to turn on the turn on...
  • Page 67 Problem or Issue Possible Solutions • Ensure there are no obstacles between the remote control and projector; and that they are within The remote control range. does not work • The batteries may be out of power, please check and replace if necessary. The projector stops •...

  • Page 68: Led Indicators

    LED Indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicators light up or flash, please contact your nearest service center for assistance.

  • Page 69: Maintenance

    • ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the lens or case. Some chemical cleaners have been reported to damage the lens and/or case of the projector. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.

  • Page 70: Regulatory And Service Information

    Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 71: Ce Conformity For European Countries

    CE Conformity for European Countries The device complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Ecodesign Directive 2009/125/EC. The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE).

  • Page 72: Declaration Of Rohs2 Compliance

    Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Actual Concentration...

  • Page 73: Indian Restriction Of Hazardous Substances

    Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®...

  • Page 74: Copyright Information

    ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). As an ENERGY STAR® partner, ViewSonic® Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein;...

  • Page 75: Customer Service

    For technical support or product service, see the table below or contact your reseller. NOTE:  You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn www.viewsonic.com/hk/ 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/...

  • Page 76: Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
  • Page 77 (e) the serial number of the product. 3. Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. 4. For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
  • Page 78 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

  • Page 79: Mexico Limited Warranty

    If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &...
  • Page 80 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based...
  • Page 81 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.

This manual is also suitable for:

Pa700scPa700xcPs502xcPs502wcVs19341Vs19343 ... Show all

Table of Contents