Table of Contents
Advertisement
4.
Panorama: Scales a 4:3 image vertically and
horizontally in a non-linear manner so that it
fills the screen.
5.
2.35:1: Scales an image so that it is displayed in
the center of the screen with a 2.35:1 aspect
ratio without aspect alteration.
6.
Anamorphic: Scales a 2.35:1 aspect image so
that it fills the screen.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press Color Mode repeatedly until your desired mode is selected.
•
Go to the PICTURE > Color Mode menu and press
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1.
Brightest mode: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
2.
Dynamic mode: Is designed for presentations under daylight environment to match
PC and notebook coloring. In addition, the projector will optimize the image quality
using the dynamic PC function in accordance with the projected contents.
3.
Standard mode: Is designed for presentations under daylight environment to match
PC and notebook coloring.
4.
ViewMatch sRGB mode: Switches between high brightness performance and
accurate color performance.
5.
Movie mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
6.
ISF Day/ISF Night mode: Only available when ISF Mode is On.
4:3 picture
2.35:1 picture
2.35:1 picture
/
31
to select a desired mode.
Advertisement
Table of Contents
