Table of Contents
Advertisement
5.
Panorama (PG703W): Scales the image proportionally to fit the projector's native
resolution in its vertical height and fills the screen in a non-linear manner.
6.
2.35:1: Scales an image so that it is displayed in the center of the screen with a 2.35:1
aspect ratio without aspect alteration.
7.
Anamorphic (PG703W): Scales a 2.35:1 aspect image so that it fills the screen.
The table below demonstrates the effects of the aspect ratio settings on projectors with
different native resolutions. Please see
display resolution of your projector.
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
Aspect ratio setting
Auto
4:3
16:9
16:10
Panorama
2.35:1
Anamorphic
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
"Projector specifications" on page 73
When the native aspect ratio of your projector is...
4:3
Not
Not available
available
Not
available
Not
available
25
16:9
for the native
16:10
Not available
Advertisement
Table of Contents
