ASSEMBLY AND INSTALLATION
T0364
WARNING:
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
Important to Know
1. Read all instructions carefully before installation and
operation.
2. If you are not familiar with state and local electrical codes,
it is recommended that you consult with a qualified
electrician.
3. Before installation, shut off power at the main fuse or
circuit breaker box. Be aware that simply turning off the
wall switch is not sufficient to prevent an electrical shock.
4. This fixture requires a 120V AC, 60 Hz power source.
5. Do not attempt to take the lantern apart; there are no
serviceable parts inside.
6. To avoid sensor damage by lightning or electrical surge,
make sure the grounding wire is securely connected.
7. For general safety and to avoid any possible damage to
the sensor, be sure the power is switched "off" before
replacing the bulb.
Maximum Wattage: 100W Incandescent bulb
Work Temperature: -4ºF ~ 104ºF
Headless Screw (D)
Lock Nut (F)
Mounting Plate (A)
House Grounding Wire
Outlet Box
Green Grounding Screw (C)
Fixture Grounding Wire
FIG.1
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Wire Nut (E)
Rubber pad(G)
Clip
Metal Frame
Glass Shade
Page 1 / 4
Features
1. Energy saving fixture.
2. Use the dim-to-bright illumination option where
you want some minimum illumination through out
the night, such as at your front entrance or
garage door. Use the dark-to-bright illumination
option where you do not need minimum
brightness, such as the backyard or back porch.
3. When in manual override mode, use wall switch
to keep the light ON till dawn.
Hardware Package (included):
Mounting Plate (A)
Wire Nut (E)
Lock Nut (F)
Back Plate
Fixture Wire
Glass Shade
Green Grounding
Mounting
Screw (C)
Screw (B)
Rubber Pad (G)
Fixture
Ball Nut Kit
Ball Nut(H)
Socket
Bulb Type A Max.60W
(not included)
Set Screw
Clip
Metal Frame
170926
Ball Nut (H)