Table of Contents
Advertisement
30
Installation
NOTE
•
You cannot stop the backup when the backup is in progress.
•
The warning message will appear for the conditions listed
below.
-
When the start time and end time are the same value.
-
When the start time is later than the end time.
-
When you set the time for data that does not exist.
-
When the start time and end time setting are wrong.
-
A media does not have enough space.
-
When the selected USB device is disconnected.
•
The disc burning is carried out by a multi session mode.
3
•
If you use the CD/DVD writer device for backup, it makes ISO
image before writing the backup data on the CD/DVD.
•
You can see the backup progress status on the system control
bar.
•
The estimated size of backup data is only the approximate size.
So you must prepare sufficient space on the media to prevent
lack of space.
•
At the scheduled recording time, you can check the backup
status on the system control bar.
•
While export is in progress or searching the backup data
from the external USB device, the scheduled backup will
not be started. After the export or backup search is finished,
scheduled backup will be restarted.
•
When you set the schedule backup, the backup data size is
estimated from the recording settings of the Setup menu. If
the real recorded data size is over the estimated recording
data size, the schedule backup may not be activated.
•
If you use the overwrite function in the [Backup] option, the
oldest backup data is deleted.
•
Although all of backup data is deleted, backup is not
implemented if the device does not have enough space.
Device settings
IP Device
•
CH: Displays the channel number.
•
Name: Enter the channel name.
•
Model Name: Displays the model name of IP device.
•
MAC: Displays the Mac address of IP device.
•
IP: Displays the IP address of IP device.
•
HTTP Port: Enter the HTTP port number. HTTPS is not supported.
•
/
: You can see other options (Driver, Profile1, Profile2,
RTSP Port, RTP Mode, Audio Recording) to click
return previous options, click
•
Driver: Selects the IP camera driver from the drop-down list.
•
Profile1: Select the camera stream on the drop-down box for
recording.
•
Profile2: Select the camera stream on the drop-down box for
streaming. For smooth live playback, the resolution of [Profile2]
set lower than resolution of [Profile1].
NOTE
•
When you select full screen mode on the [split mode],
[Profile1] operate for streaming automatically.
•
When CPU usage occupies more than 90% and then 1 minute
goes by, connection of [Profile2] is limited for the stability of
system.
•
RTSP Port: Enter the RTSP port number.
•
RTP Mode: Select the RTP mode from drop-down list.
•
Audio Recording: Check the audio recording option.
•
Setup: Click the check box of the desired channel and then
press the [Setup] button. The setup window will be displayed.
NOTE
•
In case of same driver and same model, even if you select
several channels, the [Setup] button is activated.
•
The setting of the smallest channel number among the
selected channels is displayed. And, you can configure the
same settings.
•
In case of the Axis or Onvif driver, batch setup may not work
according to the camera model and the firmware.
•
In case of the LGE models, [Profile1] and [Profile2] are displayed
as [Master] and [Slave].
button. To
button.
Advertisement
Table of Contents
