Table of Contents
Advertisement
32
Installation
To register the IP device manually
3
1. Click the [MANUAL] button.
2. Enter the IP address.
3. Click the check box of desired device.
4. Enter the [User Name] and the [Password] and then click the
[Add] button. When you select several channels, channels are
assigned same ID and password.
5. Confirm the result of authentication on the [Verify] option.
6. Click the check box of confirmed cameras. Selected cameras are
registered channel in order.
7. Click the [CLOSE] button to exit the window.
NOTE
•
The Supported IP camera specifications.
Specification
Driver
Recording mode
Video Codec
Audio recording and
playback
Resolution
Stream
PTZ
Sensor/Motion input
•
It takes time to search IP devices and the necessary time
depends on the network environment.
Description
LGE, AXIS, ONVIF
Continuous, Instant, Motion,
Sensor
H.264, MPEG4, MJPEG
Support
CIF, Half D1(2CIF), D1(4CIF), UXGA,
720p, 1080p (Up to 2048 x 1536)
LGE (Master-0, Slave-0)
ONVIF (The stream that is
supported from camera)
AXIS (H.264, MPEG4, MJPEG)
Support
Support
Storage
•
Overwrite: Sets whether you use Overwrighting function.
•
Full Warning: When the HDD has overflowed a warning message
is displayed.
•
Auto Delete: Sets the auto delete date. If you set the auto delete
date, the recorded data will be deleted except the data within
the selected date period of time. The Auto Delete function is
activated every 35 minutes.
•
Storage Saving : Saves the storage space by reducing the quality
of the recorded data.
•
Format: Initializes the HDD (Hard Disk Drive). All data on the
HDD will be erased.
•
E-SATA : Selects the E-SATA device.
•
Insert: Uses the selected E-SATA storage for recording data.
•
Eject: Uses the selected E-SATA storage for data back-up.
Advertisement
Table of Contents
