When installing:
Attention: As you route the cables, ensure that they are not subject to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Ensure that the connectors are attached firmly.
1210 dc-in cable assembly
Note: Before you start the servicing, disable the built-in battery. See "Disabling the built-in battery"
on page 66.
For access, remove these FRUs in order:
•
"1010 Removable battery" on page 66
•
"1030 Base cover assembly" on page 68
•
"1200 LCD unit" on page 93
.
Chapter 9
Removing or replacing a FRU
95