Table of Contents
Advertisement
Port Number
Function
1
Power port
2
Audio input/output ports
3
SD Card slot
4.
Alarm input/output ports
5.
Reset/WPS button/Indicator light (For reset, press and hold for 10 seconds;
for WPS, push once and release)
6.
Network port
Please refer to the chart below for information about the camera's indicator light:
Indicator Light Status
Red Light is blinking quickly.
Green Light is blinking.
Red light is solid and steady.
Green Light is solid and steady.
Red Light is blinking slowly.
3. Connection & Installation
This section provides information about the connection and installation of your camera.
3.1 Connection Guide
The camera initially should be connected via the following method:
•
POE Connection
•
Ethernet Connection / 12V Power adapter
For more information on how to connect your camera, refer to section 4, Camera Access Setup.
3.2 Installation Guide
To install the camera using the included mounting bracket you will need the following items:
•
The 2 included mounting screws.
•
The 2 included wall anchors.
•
The included mounting bracket.
•
A power drill or number 2 Phillips head screwdriver.
Device Status
The device is activating.
The device is ready to connect or is connecting to the network.
The device failed to connect to the network.
The device is connected to the network and is functioning normally.
The device is upgrading itself.
8
Advertisement
Table of Contents
Need help?
Do you have a question about the IP2M-841EW and is the answer not in the manual?