Installation; Attaching The Stand (C27Jg50Qq* / C27Jg52Qq* / C27Jg54Qq* / C27Jg56Qq* / C32Jg50Qq* / C32Jg52Qq* / C32Jg54Qq* / C32Jg56Qq*) - Samsung C27JG54QQ Series User Manual

Installation

Attaching the Stand (C27JG50QQ* / C27JG52QQ* / C27JG54QQ* / C27JG56QQ* / C32JG50QQ* / C32JG52QQ* /
C32JG54QQ* / C32JG56QQ*)
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
1
Insert the stand neck into the stand base in the
direction shown in the figure.
Check that the stand neck is firmly connected.
Caution
Do not hold the product upside down only by the
stand.
2
Tightly fasten the connecting screw at the bottom
of the stand base.
Caution
Do not press down on the monitor. There is a risk
of damaging the monitor.
3
Place the protective Styrofoam (cushion) included
in the package on the floor and place the product
facing down on the Styrofoam, as shown in the
image. If Styrofoam is unavailable, use a thick
sitting mat. Hold the back of the monitor as shown
in the figure. Push the assembled stand into the
main body in the direction of the arrow as shown
in the figure.
4
Connect the power supply and the data cable as
shown in the figure.
17